Tel: +86-371-86151827

a36 steel vs 4130 steel plate

Steel grade:a36 steel vs 4130 steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

a36 steel vs 4130 steel plate Introduction

ASTM A36 Carbon Steel vs. Normalized SAE-AISI 4130 ...

Both ASTM A36 carbon steel and normalized SAE-AISI 4130 are iron alloys. They have a very high 98% of their average alloy composition in common. For each property being compared, the top bar is ASTM A36 carbon steel and the bottom bar is normalized SAE-AISI 4130.

Annealed SAE-AISI 4140 vs. ASTM A36 Carbon Steel ...

Annealed SAE-AISI 4140 vs. ASTM A36 Carbon Steel. Both annealed SAE-AISI 4140 and ASTM A36 carbon steel are iron alloys. They have a very high 98% of their average alloy composition in common. For each property being compared, the top bar is annealed SAE-AISI 4140 and the bottom bar is ASTM A36 carbon steel.

a36 steel vs 4130 plate or coil - china-steel-suppliers

ASTM A36 steel plate, A36 steel plate, under ASTM standard, we can regard A36 steel plate as Carbon and low alloy steel A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thicknesses of material.

A36 vs. 1018 Steel Comparison | Capital Steel & Wire

1018 steel and ASTM A36 steel are two of the most highly desired steel grades on the market. Our A36 vs 1018 steel article compares properties, machinability, hardness and other characteristics. As two of the most highly sought after steel grades on the market, many questions come up between the differences in 1018 and A36 steel.

Steel Plate Grades - Continental Steel & Tube Company

ASTM A36 PLATE STEEL is a structural quality product designed for use in welded, bolted, or riveted fabrications such as oil rigs, buildings and bridges.Produced with a min. yield of 36,000 psi, A36 plate can be used in the construction of a variety of lightweight structures and equipment where good welding properties are important.

A36 Structural, Carbon & HSLA Steel Plate - BBN Steel

BBN Steel stocks a wide range of sizes of A36 in all of our warehouses. A36 is one of the most widely used grades of steel plate. ... Structural, Carbon & HSLA Steel Plate. ... AR235 / AR200 / AR Medium AR400F AR450F AR500F AR400 Flat Bars ASTM A514 ASTM A829 AISI 4130/AISI 4140.

Grade Guide: A36 Steel | Metal Supermarkets - Steel ...

Chemical Composition

Use of Mild steel vs 4130 - Welcome to The Aerodrome

Jul 11, 2008· Use of Mild steel vs 4130 Reply. Quote: ... 1026 DOM tube is readily available and much less expensive than 4130 tube form aircraft supply houses. 4130 sheet and tube is available from steel supply distribution companies and places like suppliers of race car materials (good examples: The Chassis Shop, ...

A36 Steel Plate | Midwest Steel & Aluminum

Steel plate is processed by flame cutting or High Def Plasma cutting. Hi Def Plasma is utilized to sizes 1" and under, over 1" is flame cut. A36 Steel plate has a 36,000 min yield strength. Steel Plate. Steel plate A36 is stocked in all pattern sizes up to 96" x 288" and can be processed to special shapes per print.

4130 vs 4140 Steel Comparison | Capital Steel & Wire

The following is a comparison of 4130 grade steel and 4140 grade steel. This information may be useful for machining purposes and as a resource for purchasing 4130 and 4140 steel. Chemical Properties The chemical properties of 4130 and 4140 steel are similar aside …

Differences Between Normalized and Annealed 4130 Steel ...

This process occurs in steel when it is worked, machined or heated. When 4130 is heated and held at 1,525 degrees, the crystalline structure of the steel begins to revert back to a malleable state. Fully annealed 4130 has a tensile strength of 81,200 pounds per square inch and a Rockwell hardness of 95.

Grade Guide: A36 Steel | Metal Supermarkets - Steel ...

For example, steel bars and plates must have a minimum yield strength of 36,000 pounds per square inch. While there are some chemical composition requirements that A36 steel must adhere to, the most important characteristic is the yield strength requirement. Other Mechanical Properties. A36 steel can have ultimate tensile strengths from 58,000 ...

a36 steel vs ar400 steel plate -- Henan BBN

a36 steel vs ar400 steel plate specification can be offered by KATALOR ,we are professional a36 steel vs ar400 steel plate suppliers and manufacturer in China, if you need a36 steel vs ar400 steel plate price and application ,please contact us.

Products Results | EMJ

Plate. Matched with our vast array of plate processing capabilities, EMJ’s offers plate inventory in multiple grades of carbon, stainless, alloy and aluminum plate …

Steel Plate Comparisons | Precision Grinding, Inc.

A572 grade 50 steel plate is a high-strength, low-alloy plate, specified for bridges, higher strength structural duties, and light pressure vessel requirements. Recommended for riveted, bolted, or welded structures, such as Gussets and Bridge Plates, when intended for construction of bridges. At 50ksi, a higher strength steel than A36.

ASTM A36 Steel Plate - A36 Carbon Steel Plate | Leeco ...

leecosteel› Steel Plate ProductsLeeco Steel distributes ASTM A36 steel plate, which is one of the most widely used carbon structural steels used in the industry. A36 carbon steel plate can be riveted, bolted, or welded in the construction of bridges and buildings, and for general structural purposes. We offer various thicknesses, lengths, and widths to meet your specifications.

Products - Apache Steel Works

Steel plate is a structural-quality, alloy-steel plate that can be used for a wide variety of applications where greater toughness and wear resistance is needed over lower carbon grades. 1040 AS ROLLED 1/4″ THRU 6″ THICK: It has a higher (0.40%) carbon content for …

AISI 4130 Steel | 25CrMo4 | 1.7218 | 708A25 | SCM430 ...

Annealing ASTM 4130 alloy steel offers excellent ductility. AISI 4130 steel is usually supplied as round bar commonly in the hardened and tempered condition. AISI/SAE 4130 steel grade is a versatile alloy with good atmospheric corrosion resistance and reasonable strength up to around 315º C (600º F).

steel plate | eBay

ebay› Business & IndustrialFind great deals on eBay for steel plate. Shop with confidence. Skip to main content. eBay Logo: ... 3/16" Steel Plate, 3/16" x 6" x 12", Mild Steel Plate, A36 Steel. Brand New. $4.75. Buy It Now +$7.00 shipping. 279 Sold 279 Sold. 3/8 X 6 X 12" Steel Flat Bar Bracing Welding Supports Industrial Machine Plate. Brand New. $15.25.

Online Metal Store | Small Quantity Metal Orders | Metal ...

A36 Mild Steel ASTM A36 steel is the most commonly available of the hot-rolled steels. It is generally available in round rod, square bar, rectangle bar, as well as steel shapes such as I-Beams, H-beams, angles, and channels. The hot roll process means that the surface on this steel will be somewhat rough.

What is the difference in the microstructure between A36 ...

Of course the chemical structures of steel depend on different compositions of metals. Basically A572 is high strength, low alloy Columbium-Vanadium structural steel. A514 is also high strength steel mainly used for building construction. A36 is just a common low carbonsteel used in …

Speedy Metals - Steel Plate - A-36

Steel Aluminum Stainless Steel Copper Brass Alloy Tool Steel Steel Tube Plastic Aluminum Bronze. Now In: Steel → Plate → A-36. Typical Applications. ASTM A36 is used for general purpose structural, machinery parts, frames, fixtures, automotive and agricultural implements and equipment, brackets, stakes, ornamental works, forgings, base ...

ASTM A36 Mild Steel - SAE AISI 1010 1015 1020 1025 1045 ...

ASTM A36 Standard Specification for Carbon Structural Steel covers carbon structural steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. Heat analysis shall be used to determine the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, and copper.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.