Tel: +86-371-86151827

clavicle restoration locking plates

Steel grade:clavicle restoration locking plates

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

clavicle restoration locking plates Introduction

China Clavicle Restoration Locking Plates - China Locking ...

Locking Plate, Titanium Locking Plate, Orthopedic Implant manufacturer / supplier in China, offering Clavicle Restoration Locking Plates, Orthopedic Instruments, Trauma Instruments, External Fixator, Lower Limb External Fixator Set, External Fixator, Surgical Instrument and so on.

China Clavicle Restoration Locking Plates Type II Left and ...

Locking Plates, Clacicle Restoration Locking Plates, Trauma Bone Plates manufacturer / supplier in China, offering Clavicle Restoration Locking Plates Type II Left and Right Types, Orthopedic Instruments, Trauma Instruments, External Fixator, Lower Limb External Fixator Set, External Fixator, Surgical Instrument and so on.

clavicle locking plate - alibaba

Alibaba offers 615 clavicle locking plate products. About 58% of these are implants & interventional materials, 5% are obstetrics & gynecology equipments. A wide variety of clavicle locking plate options are available to you, such as free samples.[PDF]

Locking Clavicle Plating System - acumed.net

Locking Clavicle Plate (PL-CLXXX) from the different lengths and curvatures in the system. Place the two middle screw slots or holes on either side of the fracture line, ideally leaving three locking and/or nonlocking holes both medial and lateral to the fracture fragments. The plate may be positioned medially or laterally to achieve the best fit.

Clavicle Plates, Clavicle Plates Suppliers and ...

Tags: Clavicle Restoration Locking Plate | Traumatic Metallic Locking Bone Plate . About product and suppliers: Alibaba offers 848 clavicle plates products. About 60% of these are implants & interventional materials, 19% are titanium sheets, and 5% are obstetrics & gynecology equipments.

Comminuted clavicle fracture - internal fixation with ...

Learn the Comminuted clavicle fracture – internal fixation with Stryker Variax 2 locking plate surgical technique with step by step instructions on OrthOracle. Our e-learning platform contains high resolution images and a certified CME of the Comminuted clavicle fracture – internal fixation with Stryker Variax 2 locking plate surgical procedure.

Arthrex - Clavicle Plates and Screws

Clavicle Plates and Screws Share; ... The Clavicle Plate and Screw System is a comprehensive set of plates, screws, and instruments designed to treat midshaft and distal clavicle fractures. The stainless steel plates are low profile and precontoured with locking and nonlocking screw options in each plate.

China Steel Plate Medical, Steel Plate Medical ...

Clavicle Restoration Steel Plates (Left And Right Type) FOB Price: US $ 10-100 / Piece Min. Order: 1 Piece. ... cheap locking plate, discount trauma bone plate. You could also discover the latest health, medical and pharmaceutical news updated daily in our trade resource center. Pharmaceutical, and medical devices and diagnostics products touch ...[PDF]

VariAx Clavicle Locking Plate System

clavicle may be stabilized either with fixation placed superiorly or anteriorly based on surgeon preference and fracture type. With this in mind, Stryker has developed the VariAx Clavicle Locking Plate System: an anatomically shaped, variable angled locking plate system, which offers a range of plate …

3.5mm LCP® Superior Clavicle Plate | DePuy ... - Synthes

The 3.5mm LCP ® Superior Clavicle Plates combine screw technology with conventional plating techniques. The combi holes allow fixation with locking screws in the threaded section for angular stability and cortex screws in the dynamic compression unit (DCU) section for compression.[PDF]

Part of the DePuy Synthes Locking Compression Plate …

3.5 mm LCP Superior Anterior Clavicle Plates. Part of the DePuy Synthes locking compression plate (LCP) System. Recon plate segments Allow contouring of plates to fi t patient anatomy Rounded plate profi le and screwheads seated fl ush in the plate Help minimize the risk for soft tissue irritation

Comminuted clavicle fracture - internal fixation with ...

Learn the Comminuted clavicle fracture – internal fixation with Stryker Variax 2 locking plate surgical technique with step by step instructions on OrthOracle. Our e-learning platform contains high resolution images and a certified CME of the Comminuted clavicle fracture – internal fixation with Stryker Variax 2 locking plate surgical procedure.[PDF]

Part of the DePuy Synthes Locking Compression Plate …

3.5 mm LCP Superior Anterior Clavicle Plates. Part of the DePuy Synthes locking compression plate (LCP) System. Recon plate segments Allow contouring of plates to fi t patient anatomy Rounded plate profi le and screwheads seated fl ush in the plate Help minimize the risk for soft tissue irritation

Minimally invasive in the treatment of clavicle middle ...

After pre-modification according to the morphology of clavicle, the locking reconstruction plate was inserted slowly through the external incision into the tunnel that had already been prepared. The location of locking reconstruction plate and the restoration of displaced clavicle …[PDF]

Clavicle Locking Plate - University of Washington

The PERI-LOC™ Clavicle Locking Plates are indicated for fixation of fractures, non-unions and osteotomies of the clavicle. Plate Features • Four plates: superior medial, superior distal, inferior medial and inferior distal • Plate configurations allow for both superior and anterior-inferior plating techniques[PDF]

Addition of a Suture Anchor for Coracoclavicular Fixation ...

with anatomical locking plate fixation combined with coracoclavicular ligament augmentation. Methods Twelve patients with Neer Type IIb distal clavicle fractures treated with anatomical locking plate fixation combined with suture anchor augmentation of the coracoclavicular ligament, were retrospectively studied.[PDF]

LCP Superior Clavicle Plate. The anatomically …

LCP Superior Clavicle Plate with lateral extension LCP Superior Clavicle Plate. The anatomically precontoured fixation system with angular stability for clavicle shaft and lateral clavicle. Features and Benefits Lateral holes 2.7 mm locking or 2.4 mm cortex screws Shaft holes 3.5 mm locking or 3.5 mm cortex screws Undercuts reduce impairment of ...

Operative Treatment of Clavicle Midshaft Fractures ...

ncbi.nlm.nih.gov› …› Clin Orthop Surg› v.2(3); 2010 SepAug 03, 2010· To compare the outcomes of reconstruction plate and reconstruction locking compression plate (LCP) for the treatment of clavicle midshaft fractures. Between June 2000 and May 2008, 69 cases of an open reduction and internal fixation with a plate were performed for clavicle midshaft fractures. Of ...[PDF]

Operative Treatment of Clavicle Midshaft Fractures ...

Cho et al. Reconstruction Plate versus Reconstruction Locking Compression Plate for Clavicle Fractures Clinics in Orthopedic Surgery • Vol. 2, No. 3, 2010 • ecios.org noted in the surgically treated cases. In addition, the extent of fragment displacement is closely associated with fracture union12,17) and anatomical restoration of the[PDF]

VariAx Clavicle Locking Plate System

clavicle may be stabilized either with fixation placed superiorly or anteriorly based on surgeon preference and fracture type. With this in mind, Stryker has developed the VariAx Clavicle Locking Plate System: an anatomically shaped, variable angled locking plate system, which offers a range of plate …[PDF]

Clavicle Plate and Screw System Surgical Technique

Clavicle Plate and Screw System The Clavicle Plate and Screw System is a comprehensive set of plates, screws and instrumentation designed to treat central third and distal clavicle fractures. The clavicle plates are low profile, precontoured, stainless steel central third and distal plates that combine locking and nonlocking options in each plate.[PDF]

Technique Guide - synthes.vo.llnwd.net

2 Synthes 3.5 mm LCP Superior and Superior Anterior Clavicle Plates Technique Guide 3.5 mm LCP Superior and Superior Anterior Clavicle Plates. Part of the Synthes modular clavicle plate system. The 3.5 mm LCP Clavicle Plates combine locking screw technology with conven-tional plating techniques and include the following:[PDF]

VariAx 2 Elbow Locking Plate System - …

VariAx 2 Clavicle Locking Plate System Operative technique This publication sets forth detailed recommended procedures for using Stryker devices and instruments. It offers guidance that you should heed, but, as with any such technical guide, each surgeon must consider the particular needs of each

Total Wrist Fusion Plating System | Acumed

The SaveLock Compression Sleeve allows the Hexalobe MultiScrew to function as both a locking and nonlocking screw all in one. When inserted in to the unthreaded slots of the Total Wrist Fusion Plate the Hexalobe MultiScrew is nonlocking, allowing the plate to compress to the bone.[PDF]

Locking Clavicle Plating System - Cambridge Orthopaedics

Locking Anterior Clavicle Plate Surgical Technique 16 Locking Distal Clavicle Plate Surgical Technique 20 Additional Shoulder Solutions 24 Ordering Information 25 Notes 26 2 Since its introduction as the orthopaedic industry’s fi rst anatomic resource for clavicle fi xation, surgeons have utilized the versatility of the Acumed Locking ...

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.