Tel: +86-371-86151827

s275 galvanised steel steel coil

Steel grade:s275 galvanised steel steel coil

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

s275 galvanised steel steel coil Introduction

galvanized steel coil S275 | Building materials | Tabdevi

galvanized steel coil S275. Quick detailsthe galvanized steel pipeline zinc finish:Pre-galvanized: Z80-120g/ m2;Hot dip galvanized: Z230-500g/ m2. Hot dipped galvanized steel pipes & Pre-galvanized steel pipe specification:Out Diameter: 1/2-24″( 21.3mm-610mm)Wall Thickness: SCH10, SCH30, SCH40,

galvanized steel coil S275 | Extractive industry, stones ...

galvanized steel coil S275. Quick detailsthe galvanized steel pipeline zinc finish:Pre-galvanized: Z80-120g/ m2;Hot dip galvanized: Z230-500g/ m2. Hot dipped galvanized steel pipes & Pre-galvanized steel pipe specification:Out Diameter: 1/2-24″( 21.3mm-610mm)Wall Thickness: SCH10, SCH30, SCH40,

EN10025 2 Specification-S235-S275-S355 Steel Plate

AGICO ANSON is able to supply all kinds of structural steel plate produced by En10025-2 standard, which mainly includes 4 major grades: S235, S275, S355 and S450, there's also more specific steel grades for different mechanical properties. As same as common structural steel, steel plate and pipes under this standard are featured with good weldability, formability, hot forming, cold formability ...

s275 steel data steel coil - steelconstructioncosts

From the S275 steel grade, a validation coil (rolled in September 2005) of 579 m in length and of 3 mm ... strength steel data set has an input layer using the model. ... Galvanized Steel Coil ... carbon/low alloy plates from Wuyang Iron&steel company . Technical Data.[PDF]

S275 Steel Coil, S275 Steel Coil Suppliers and ...

Alibaba offers 292 s275 steel coil products. About 83% of these are steel sheets, 1% are stainless steel sheets. A wide variety of s275 steel coil options are available to you, such as aisi, en, and astm.

Mufaddal Steel - Galvanised & black Steel Pipes, Tubes, H ...

EN 10025 S275 JR (IPE Sections) IPE 100 TO IPE 600 : EN 10025 S275 JR BS 4360 Gr. 43A : Round Bars : ... Galvanized Steel Coils/Plain Sheets (GP Coils/Sheets) The array of our Hot Dipped Galvanized Coils / plain sheets has the following features: Thickness 0.11mm to 3.00mm

Steel Construction S275 Galvanised H Beam - steeltube.in

Steel Construction S275 Galvanised H Beam. Our steels have been widely applied to many industries and fields, such as the construction industry, shipbuilding industry, pressure vessels and boilers, oil and gas, bridge construction, offshore platforms, stamping cold forming,etc.

Hot Rolled Steel Sheet manufacturer - quality Hot Rolled ...

S235/S275/S355 MS Sheet , ST52 Hot Rolled Coil Steel Thickness 8mm-600mm. Carbon Hot Rolled Steel Plate SS400 HRS HRP 1500-2500mm for Construction. Cold Rolled Steel Coil (29) ... Galvanized Steel Coil (51) SGCC Galvanized Plain Sheet DX51D Z275 Thickness0.12MM-2.0MM for Construction.

s275 steel data steel coil - steelconstructioncosts

From the S275 steel grade, a validation coil (rolled in September 2005) of 579 m in length and of 3 mm ... strength steel data set has an input layer using the model. ... Galvanized Steel Coil ... carbon/low alloy plates from Wuyang Iron&steel company . Technical Data.[PDF]

Steel Construction S275 Galvanised H Beam - steeltube.in

Steel Construction S275 Galvanised H Beam. Our steels have been widely applied to many industries and fields, such as the construction industry, shipbuilding industry, pressure vessels and boilers, oil and gas, bridge construction, offshore platforms, stamping cold forming,etc.

Mufaddal Steel - Galvanised & black Steel Pipes, Tubes, H ...

EN 10025 S275 JR (IPE Sections) IPE 100 TO IPE 600 : EN 10025 S275 JR BS 4360 Gr. 43A : Round Bars : ... Galvanized Steel Coils/Plain Sheets (GP Coils/Sheets) The array of our Hot Dipped Galvanized Coils / plain sheets has the following features: Thickness 0.11mm to 3.00mm

S275 Galvanised I Shaped Beam Steel - Made-in-China

Tianjin Xuboyuan Iron & Steel Trading Co., Ltd. I Beam, I Shaped Beam, Large Quantity of I Beam manufacturer / supplier in China, offering S275 Galvanised I Shaped Beam Steel, Cold Rolled Steel Coil for Making Sheet and Pipe Made in China, Building Material ASTM A36 Grade Black Rectangular Steel Pipe in Tianjin and so on.

What is Galvanized Steel Coil? (with pictures) - wisegeek

Feb 03, 2019· Galvanized steel coil is a special type of steel coil used in a number of different applications within fabrication and manufacturing environments. Steel coil of any kind is flat stock that is thin enough to be rolled into a coil or wound into a continuous roll. It is also able to be rolled out flat and cut at any length or shape needed.

s275 steel young's modulus pipe or bar

West Yorkshire Steel are suppliers of S275 steel plate. S275 is an unalloyed low carbon mild steel grade supplied as hot rolled. Structural Steel - S235, S275, S355 Chemical … Structural steel is a standard construction material, made from specific grades of steel and formed in a range of industry standard cross-sectional shapes.

Hot Rolled Steel Sheet manufacturer - quality Hot Rolled ...

S235/S275/S355 MS Sheet , ST52 Hot Rolled Coil Steel Thickness 8mm-600mm. Carbon Hot Rolled Steel Plate SS400 HRS HRP 1500-2500mm for Construction. Cold Rolled Steel Coil (29) ... Galvanized Steel Coil (51) SGCC Galvanized Plain Sheet DX51D Z275 Thickness0.12MM-2.0MM for Construction.

Zinc coating (Z) - Hot-dip galvanized steel - SSAB

Protection against rust with zinc coating Zinc coating (Z) produced on both sides by hot-dip galvanizing extends the service life of the end product by protecting the steel from corrosion. The continuous hot-dip galvanizing process offers a wide protection range from Z100 to Z600 in addition to a tight bond between the coating and the steel.

Hot Dipped Galvanized Steel Sheet & Coil | Alliance Steel

alliancesteel.net› Products› Coated SteelProtect against corrosion with hot dipped galvanized steel products from Alliance Steel. Hot dip galvanizing is a process of coating steel with a thin zinc layer, which serves as a barrier between the steel and the environment. The finish is applied by passing the steel through a molten bath of zinc at a high temperature.

Galvanised coil - ArcelorMittal South Africa

Galvanised coil It is the process of applying a protective zinc coating to steel to prevent rusting. The most common method is hot-dip galvanising, in which parts are submerged in a bath of molten zinc.

s275 steel sheet Mechanical behavior

Plates of S690Q steel grade ... Mechanical properties under EN 10025-6 Steel grade ... possess limited weldability properties since steel behavior before and ...· 2015-3-30. We stock, distribute and add value to Steel Coil • … We stock, distribute and add value to Steel ... Mild Carbon Steel in Coil…

Q235 galvanized pipe material properties

galvanized steel pipe ,Galvanized scaffolding structure pipe,Hot-dip . The hot dip galvanized steel pipe line refers to a welded pipeline with hot dip The Q235 steel function great elongation, tensile strength, perseverance, and The Q345B steel offers superior mechanical properties such as excellentplasticity . Galvanized Steel Pipe

China S275 Steel H Beam for Structural Steel Buildings ...

China S275 Steel H Beam for Structural Steel Buildings Materials with Lowest Price, Find details about China H Beam, S275 Steel H Beam from S275 Steel H Beam for Structural Steel Buildings Materials with Lowest Price - LIAOCHENG HUAJIAN STEEL CO., LTD.

China Dx51d Z275 Galvanised Steel Coil - China Steel Coil ...

Steel Coil, Galvanized Steel Coil, Galvanized Coil manufacturer / supplier in China, offering Dx51d Z275 Galvanised Steel Coil, Cold Rolled Color Coated Galvanized Steel Coil for Roofing Sheet, Cold Rolled Color Coating Galvanized PPGI Steel Coil for Roof Sheet and so on.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.