Tel: +86-371-86151827

hot dip galvalume steel coil and gl steel sheet

Steel grade:hot dip galvalume steel coil and gl steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot dip galvalume steel coil and gl steel sheet Introduction

Hot Dip Galvanize Steel - Zero Spangle Galvanized Steel ...

Hot Dip Galvanize Steel. We are a leading Manufacturer of zero spangle galvanized steel coil, galvalume steel coils, galvanized steel strips, galvanized strip, galvanized steel tapes and galvanized steel strip from Mumbai, India.

Hot Dip Galvanised Steel - Zibo Camel Material Co., Ltd

Galvanized steel coil (GI), Galvalume steel coil (GL), Pre-painted galvanized steel coil (PPGI) and Pre-painted galvalume steel coil (PPGL). Surface treatment of PPGI/ PGL is print, emboss, filmed, sand suface, wrinkle, highlight, etc. 2. What’s your capacity? We have 4 production lines which can produce about 20000 tons of GI/ GL, PPGI/ PPGL. 3.

The skip plating defects of hot dip galvalume steel sheet ...

A. Reasons. 1. The wettability of Al-Zn-Si melt and steel is much worse than pure Zn melt. At the same time, as the drastically increase of plating bath temperature and the aluminum content, the manufacturing technique of hot dip galvalume steel sheet has undergone fundamental changes. The melting point of …

Quality Galvalume Steel Coil & Hot Dipped Galvanized Steel ...

SGLCC Hot Dip Galvalume Anti Corrosion Steel 55% Al 1.6% Si Anti - Finger For Garage Door. EN 10215 Corrosion Resistance Prepainted Steel Coil , Width 600mm - 1250mm GL Steel Coil. Siding Roofing Pre Painted Galvalume Sheets. Hot Dipped Galvanized Steel Coils. 18 -25MT Hot Dipped Galvanized Steel Coils. Skinpassed A653M Galvanized Steel Coils

1000mm AZ40 Hot Dip Galvalume GL Steel Coil

Galvalume consists of 55% aluminum, 43.4% zinc and 1.6% silicon over the base metal. This coating is applied during a continuous hot-dip process. AZ40. Galvalume Steel Coil Az150 - Alibaba. Tags: Ppgl · Astm A792 hot dipped galvalume aluzinc steel coil AZ150. Compare ASTM A653 Az150 Competitive Price Gl Galvalume Steel Coils. Compare ...

Prime Hot Dipped Galvanized Steel Sheet in Coils (HDGI ...

Prime Hot Dipped Galvanized Steel Sheet in Coils (HDGI) ... + Zinc Aluminium Coated Steel in Coil (GL) + Pre-painted Galvanized Steel Sheet in Coil (PPGI) ... Pickled & oiled steel coil, Cold rolled coil, Hot dip galvanized and Hot dip Galvalume, Prepainted Galvalnized, Prepainted Galvalume alloyed. ...

Galvalume & Aluzinc Steel Coil, China GL Manufacturer ...

hengze-steel› Sheet & CoilSimilar to galvanized steel, Galvalume is produced by a hot-dip process. Instead of 100% zinc, the dip is 55% aluminum, 43.5% zinc and 1.5% silicon. Galvalume Steel Coil have excellent performance, possessing ideal comprehensive properties of corrosion resistance, formation and coating.

Galvanized steel sheets/coils,Corrugated Steel Sheet ...

Hot dip galvanized steel coil Chinese supplier prepainted factory price ; Zinc aluminium coated roofing sheet China galvalume steel coil az150 electro g40 galvanized plate ; Low price prepainted galvalume steel PE paint or color coated factory standard PPGL steel coil sheet or strip

Galvalume(GL) | Galvanized Steel Sheet | PRODUCTS | UNION ...

Galvalume (GL) Galvalume Galvalume (GL) Galvalume Galvalume Steel Sheet_Aluminum-Zinc Alloy Coated Steel Sheets (GL) are galvanized steel sheets with both zinc and aluminum, and is the ideal combination of anti-corrosion and alkali-resistance of zinc, and the durability, heat-resistance, and acid-resistance of aluminum.

Galvalume & Aluzinc Steel Coil, China GL Manufacturer ...

hengze-steel› Sheet & CoilSimilar to galvanized steel, Galvalume is produced by a hot-dip process. Instead of 100% zinc, the dip is 55% aluminum, 43.5% zinc and 1.5% silicon. Galvalume Steel Coil have excellent performance, possessing ideal comprehensive properties of corrosion resistance, formation and coating.

Hot-dip Galvanized Steel Sheets(GI) | Galvanized Steel ...

Hot-dip Galvanized Steel Sheets (GI) Hot-dip Galvanized Steel Sheets Hot-dip Galvanized Steel Sheets (GI) Hot-dip Galvanized Steel Sheets Hot-dip galvanized steel sheets (GI) are produced by passing the full hard sheet which has undergone the acid washing process and rolling process through the zinc pot, thereby applying zinc film to the surface.

Prime Hot Dipped Galvanized Steel Sheet in Coils (HDGI ...

Prime Hot Dipped Galvanized Steel Sheet in Coils (HDGI) ... + Zinc Aluminium Coated Steel in Coil (GL) + Pre-painted Galvanized Steel Sheet in Coil (PPGI) ... Pickled & oiled steel coil, Cold rolled coil, Hot dip galvanized and Hot dip Galvalume, Prepainted Galvalnized, Prepainted Galvalume alloyed. ...

1000mm AZ40 Hot Dip Galvalume GL Steel Coil

Galvalume consists of 55% aluminum, 43.4% zinc and 1.6% silicon over the base metal. This coating is applied during a continuous hot-dip process. AZ40. Galvalume Steel Coil Az150 - Alibaba. Tags: Ppgl · Astm A792 hot dipped galvalume aluzinc steel coil AZ150. Compare ASTM A653 Az150 Competitive Price Gl Galvalume Steel Coils. Compare ...

Hot Dip Gl Steel Sheets, Hot Dip Gl Steel Sheets Suppliers ...

Alibaba offers 2,633 hot dip gl steel sheets products. About 81% of these are steel sheets, 10% are metal building materials, and 1% are stainless steel sheets. A wide variety of hot dip gl steel sheets options are available to you, such as coil, plate.

GL - Suzhou GWB Steel Co,. Ltd - tradesteelcoil

We suzhou GWB STEEL CO.,LTD, The professional supplier of GI, GL, PPGI/PPGL, SILICON STEEL COIL,HRC,CRC. Hot dipped galvalume steel coil/sheet, put based steel sheet in melting zinc, then it will be the sheet sticking of a layer of zinc.At present mainly adopts continuous galvanizing process, namely put the continuous roll of steel coil in the ...

China Az150 Hot DIP Galvalume Aluzinc Steel Coil for ...

Steel Coil, Gl Steel Coil, Zincalume Steel Coil manufacturer / supplier in China, offering Az150 Hot DIP Galvalume Aluzinc Steel Coil for Roofing Tile, ASTM A516 Gr70 Building Material Boiler Steel Plate/Boiler Steel Plate, Building Material Prepainted Galvanized Steel Coil/PPGI/Color Steel Coil …

Hot dip Gl 55% Al zn Alloy Coated Steel Sheet coil - w3s.in

Hot dip Al zn Alloy Coated Coil - natural-elements-online. Galvalume steel coil (Hot-dip Al-Zn alloy coated steel) sheet is a high-quality alloy coated product, widely used in household appliances, construction, automotive and color coating, packaging and other industries.Hot dip Al Zn steel plate has excellent corrosion resistance and moisture and heat resistance, and also has high ...

Quality Galvanized Steel Coil & Galvalume Steel Coil ...

We buy GL and PPGL from Sunrise Steel, I am very satisfied with the G550 quality, and the good anti-faded function of the PPGL. ... We are good quality supplier of Galvanized Steel Coil, Galvalume Steel Coil Prepainted Steel Coil from China. Hot Dip Galvanized Steel Sheet / Q195 , Q235 Grade Galvanized Steel Roll.

Galvanized Steel Coil, Prepainted Steel Coil, Galvalume ...

Modern Steel was founded in 2008 covers an area of 15 Hm², mainly produces galvanized steel, galvalume steel,pre-painted steel, roofing sheet and so on. At moment,there is a galvanized steel production line with annual output of 120,000 tons and a color …

China Galvalume Steel Suppliers & Manufacturers & Factory ...

Galvalume steel sheet in coil also called GI coil, Galvalume steel is carbon steel coated with an aluminum-zinc alloy using a continuous hot dip process, combining the corrosion protection and high temperature resistance of aluminum with the formability and galvanic...

China ASTM A792 Hot DIP Galvalume Steel Coil for Steel ...

Steel Coil, Gl Steel Coil, Steel Products manufacturer / supplier in China, offering ASTM A792 Hot DIP Galvalume Steel Coil for Steel Materials, Color Coated Prepainted Galvanized Iron Roofing Sheet for Roof Tile, Antifinger Print Az150 Aluzinc Coated Galvalume Steel Coil and so on.

China Hot DIP Galvalume Steel Coil (GL) - China Steel ...

Steel, Steel Coil, Galvalume Steel manufacturer / supplier in China, offering Hot DIP Galvalume Steel Coil (GL), Professional Manufacture of Prepainted Galvanized Steel Coil (GI, PPGI, PPGL Steel), Galvanized Steel Sheets in Plate/Building Material and so on.

Galvalume Steel Sheet & Coil | Alliance Steel

alliancesteel.net› Products› Coated SteelResist rust, fire and elemental onslaughts with galvalume steel sheet & coil from Alliance Steel. Galvalume steel is carbon steel coated with an aluminum-zinc alloy using a continuous hot dip process, combining the corrosion protection and high temperature resistance of aluminum with the formability and galvanic protection of zinc.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.