Tel: +86-371-86151827

prepainted steel coil steel coil for roofing

Steel grade:prepainted steel coil steel coil for roofing

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

prepainted steel coil steel coil for roofing Introduction

Prepainted Steel Sheet - Painted Steel Coil | Alliance Steel

alliancesteel.net› ProductsProtect against corrosion and pick your color with pre-paint steel products from Alliance Steel. Pre-paint steel is a bare metal substrate or corrosion resistant substrate that has had paint applied to both sides through a continuous coil coating process, which produces a uniform paint finish.

Quality Prepainted Steel Coil & Color Coated Steel Coil ...

XIN HONG NEW MATERIALS CO.,LTD is best Prepainted Steel Coil, Color Coated Steel Coil and PPGI Steel Coil supplier, we has good quality products & service from China.

Prepainted Steel, Aluminum and the Coil Coating Process ...

The process by which prepainted steel and aluminum is created is called coil coating. It is how the coating material is applied to the strip. A coil of metal sheet is continuously fed into the process wich is controlled via accumulators at each end of the line.

PREPAINTED GALVANIZED STEEL COIL(PPGI)1 - PREPAINTED …

Jinan Sino Steel Co., Ltd, founded in 1989, covers an area of 100,000 square meters, with more than 900 employees. Shandong Sino Steel is mainly engaged in producing and exporting galvanized steel coil/sheet(GI), prepainted galvanized steel coil/sheet(PPGI), corrugated galvanized sheet and tinplate coil…

Galvanized Steel Coil, Prepainted Steel Coil, Galvalume ...

Modern Steel was founded in 2008 covers an area of 15 Hm², mainly produces galvanized steel, galvalume steel,pre-painted steel, roofing sheet and so on. At moment,there is a galvanized steel production line with annual output of 120,000 tons and a color …

Quality Prepainted Galvanized Steel Coil & Hot Dipped ...

Zhangjiagang Wancheng New Material Co.,LTD. is best Prepainted Galvanized Steel Coil, Hot Dipped Galvanized Steel Coil and PPGI Steel Coil supplier, we has good quality products & service from China.

Roof Prepainted Steel Coil, Roof Prepainted Steel Coil ...

Alibaba offers 32,225 roof prepainted steel coil products. About 92% of these are steel sheets, 1% are stainless steel sheets, and 1% are other metal & metallurgy machinery. A wide variety of roof prepainted steel coil options are available to you, such as coil, plate.

PPGI & PPGL, Prepainted Steel Coils & Sheets Manufacturer ...

The prepainted steel sheet in coil is a product obtained by subjecting a hot-dipped galvanized steel sheet, an galvalume steel sheet, or an aluminum sheet to a surface chemical treatment (coating) or a composite organic film (such as a PVC film), followed by baking and curing.. 1) PPGI also known as prepainted galvanized steel coil and color coated steel coil, with a hot dip zinc coated steel ...User rating: 4/5

Prepainted Steel, Aluminum and the Coil Coating Process ...

The process by which prepainted steel and aluminum is created is called coil coating. It is how the coating material is applied to the strip. A coil of metal sheet is continuously fed into the process wich is controlled via accumulators at each end of the line.

coil Prepainted Steel coil for roofing sheet - gofschools.org

coil Prepainted Steel coil for roofing sheet. ... Modern Steel was founded in 2008 covers an area of 15 Hm², mainly produces galvanized steel, galvalume steel,pre-painted steel, roofing sheet and so on. At moment,there is a galvanized steel production line with annual output of 120,000 tons and a color coated production line with annual ...

PREPAINTED GALVANIZED STEEL COIL(PPGI)1 - PREPAINTED STEEL …

Jinan Sino Steel Co., Ltd, founded in 1989, covers an area of 100,000 square meters, with more than 900 employees. Shandong Sino Steel is mainly engaged in producing and exporting galvanized steel coil/sheet(GI), prepainted galvanized steel coil/sheet(PPGI), corrugated galvanized sheet and tinplate coil…

PREPAINTED STEEL COIL - sino-steel.net

Shandong Sino Steel Co., Ltd was one large Steel Holding Company, as a window of foreign trade of Chinese Steel industry, our company has been conducting extensive exchanges and friendly co-operations with domestic and overseas companies on the ba

Quality Prepainted Galvanized Steel Coil & Hot Dipped ...

Zhangjiagang Wancheng New Material Co.,LTD. is best Prepainted Galvanized Steel Coil, Hot Dipped Galvanized Steel Coil and PPGI Steel Coil supplier, we has good quality products & service from China.

Prepainted galvanized steel coil PPGI - CAMELSTEEL

Our main products include prepainted galvanized steel coil, prepainted galvalume steel coil, galvanized steel coil, galvalume steel sheet and corrugated roofing sheet etc. . And they are widely applied in the area of building, household appliances, light industry and decoration etc. , both domestic and foreign markets.

National Coil Coating Association - NCCA - Prepainted ...

The National Coil Coating Association or NCCA is an association of companies providing prepainted steel and aluminum coils. Learn more at coilcoating.org

PPGI & PPGL Steel Coils, PrePainted Galvanized Steel Coil ...

hengze-steel› Sheet & CoilUsing Hot Galvanized Steel Coil as the substrate, color coated steel coil is made by first going through surface pretreatment, then the coating of one or more layers of liquid coating by roll coating, and finally baking and cooling.

China Tinplate manufacturer, Prepainted Steel Coil ...

Tinplate, Prepainted Steel Coil, Galvalume Steel Coil manufacturer / supplier in China, offering Chinese Low Price Color Coated Steel Coil/Secondary PPGI Steel Sheet, Africa 0.16*665mm PPGI Color Coated Corrugated Prepainted Steel Roofing Sheet, Color Roof Tile/PPGI Roof Sheet/Prepainted Corrugated Steel Roofing Sheet and so on.

Coil and Sheet - Coated Metals Group - Pre-Finished Steel ...

Home Coil & Sheet. Coil & Sheet. Coated Metals Group is a leading manufacturer of pre-painted coil and flat sheet to the building construction industry. Coils are processed to the customer’s precise specifications, including custom widths and exact lineal footages.

astm a653 g90 galvanized steel coil, View prepainted steel ...

5. life span of PPGI is usually 1.5 times longer than that of galvanized steel coil 6. they are mainly applied for construction, decoration, roofing title, wall panel, furniture, transportation and other industries 7.as a rich experience manufacturer, we provide quality product, competitive . price and reliable after-sales service. Types of ...

Galvanized steel sheets/coils,Corrugated Steel Sheet ...

FULITAI STEEL GROUP is China's leading supplier dedicated to providing its customers with the quickest quotes, best quality products, most competitive prices and fastest possible deliveries of pre-painted steel coils, galvanized steel coil/sheets, metal roofing tiles,Corrugated Steel Sheet,Aluminum Zinc Steel Coils/Sheet,Pre-painted Aluminum ...

Prepainted Steel Coils, Prepainted Steel Coils ... - Alibaba

Alibaba offers 61,417 prepainted steel coils products. About 90% of these are steel sheets, 1% are stainless steel sheets, and 1% are other metal & metallurgy machinery. A wide variety of prepainted steel coils options are available to you, such as aisi, astm, and bs.

China Prepainted/Colour Coated Galvanized Steel Coils for ...

Prepainted Steel Coil, Galvanized Steel Coil, Color Coated Steel Coil manufacturer / supplier in China, offering Prepainted/Colour Coated Galvanized Steel Coils for Roofing Sheet PPGI, 0.45mm*1219mm Gl Dx51d Galvalume Steel Coils with Az150, G550 Az150 55% Al Galvalume Steel Coil for Building Material and so on.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.