Tel: +86-371-86151827

astm a36 hot rolled carbon steel sheet steels

Steel grade:astm a36 hot rolled carbon steel sheet steels

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a36 hot rolled carbon steel sheet steels Introduction

ASTM A36 Carbon Structural Steel Plate - steels-supplier

ASTM A36 steel plate is the most widely used hot-rolled steel product. As a kind of carbon structural steel product, its relative products are round rod steel, angle bar, and steel sections such as I-Beams, H-beams, angles, and channels.

ASTM A36 Steel Plate - Completely Specifications You ...

What Is ASTM A36

ASTM A36 Steel Composition, Properties, Hardness ...

ASTM A36 steel is one of the most widely used carbon structural steels, although the the max carbon content of A36 steel is 0.26%, it is considered by many to be mild steel (content of carbon ≤ 0.25%), because its data sheet and properties are very close to those of low carbon steel.

astm A36 steel plate tolerances

Metals & Alloys› Steel› Steel SheetsThe A36 carbon steel sheet has been hot rolled, has an unpolished (mill) surface, meets American Society for Testing and Materials International ASTM A36 specifications, and has a standard tolerance. The A36 carbon steel grade is a structural steel that has better formability than 1018 carbon steel.User ...

A36 vs. 1018 Steel Comparison | Capital Steel & Wire

A36 Steel. ASTM A36 steel is one of the most widely manufactured grades of steel bar, as it has many different applications across many industries. Like 1018, it can be hot rolled or cold drawn, but is typically hot rolled. So again, in this comparison, we’ll assume A36 is hot rolled.

Hot Rolled Carbon – Olympic Steel

olysteel› ProductsOlympic Steel boasts a broad range of hot rolled coil, sheet and plate steel products and grades in inventory; in both Hot Roll dry and Pickled and Oiled (P&O), automotive grades, Advanced High Strength Steels (AHSS), High Strength Low Alloys (HSLA) in both ASTM and AISI standards, as well as branded products COR-TEN®, DOMEX ™, EX-TEN®, FREMAX® steel products and more.

ASTM A1011 / A1011M - 18a Standard Specification for Steel ...

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.. ASTM Standards. A370 Test Methods and Definitions for Mechanical Testing of Steel Products. A568/A568M Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General …

Grade Guide: A36 Steel - Steel, Aluminum, Stainless, Hot ...

Chemical Composition

H Beam Astm A36 Carbon Hot Rolled Prime Structural Steel …

Find h beam astm a36 carbon hot rolled prime structural steel h beam here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

ASTM A36 Steel Composition, Properties, Hardness ...

ASTM A36 steel is one of the most widely used carbon structural steels, although the the max carbon content of A36 steel is 0.26%, it is considered by many to be mild steel (content of carbon ≤ 0.25%), because its data sheet and properties are very close to those of low carbon steel.

ASTM A36 Mild/Low Carbon Steel - Materials Engineering

ASTM A36 is the most commonly used mild and hot-rolled steel. It has excellent welding properties and is suitable for grinding, punching, tapping, drilling and machining processes. Yield strength of ASTM A36 is less than that of cold roll C1018, thus enabling ASTM A36 to bend more readily than C1018 ...

A36 vs. 1018 Steel Comparison | Capital Steel & Wire

A36 Steel. ASTM A36 steel is one of the most widely manufactured grades of steel bar, as it has many different applications across many industries. Like 1018, it can be hot rolled or cold drawn, but is typically hot rolled. So again, in this comparison, we’ll assume A36 is hot rolled.

ASTM A36 Carbon Structural Steel Plate - steels …

ASTM A36 Carbon Structural Steel Plate: ASTM A36 steel plate is the most widely used hot-rolled steel product. As a kind of carbon structural steel product, its relative products are round rod steel, angle bar, and steel sections such as I-Beams, H-beams, angles, and channels.

SPHC ASTM A36 Carbon Steel Hot Rolled Steel Coil mild ...

SPHC ASTM A36 Carbon Steel Hot Rolled Steel Coil mild steel can be offered by us, we have SPHC ASTM A36 Carbon Steel Hot Rolled Steel Coil mild steel suppliers and manufacturer ,if you need SPHC ASTM A36 Carbon Steel Hot Rolled Steel Coil mild steel price and specification ,please contact us.

H Beam Astm A36 Carbon Hot Rolled Prime Structural Steel …

Find h beam astm a36 carbon hot rolled prime structural steel h beam here with GNEE which is one of the leading manufacturers and suppliers in China. We have bulk hot sale products in stock at your choice. For chemical composition consultation and free sample, welcome to contact our factory.

ASTM A36 Steel Sheets, ASTM 36 Carbon ... - aspirinox

ASTM A36 Sheets, Carbon Steel A36 Cold Rolled Plates, ASME SA A36 Shim Sheets, A36 Carbon Steel Slatting Coils, A36 Carbon Steel Hot Rolled Sheets Stockists & Exporter Aspirinox Alloys Inc is a recognized manufacturer supplier and exporter of A36 Steel Sheets & Plates .[PDF]

1018 Mild Steel - Eagle National Steel

A36 Mild Steel ASTM A36 steel is the most commonly available of the hot-rolled steels. It is generally available in round rod, square bar, rectangle bar, as well as steel shapes such as I-Beams, H-beams, angles, and channels. The hot roll process means that the surface on this steel will be somewhat rough.

ASTM A36 Steel Plate - A36 Carbon Steel Plate | Leeco ...

leecosteel› Steel Plate ProductsLeeco Steel distributes ASTM A36 steel plate, which is one of the most widely used carbon structural steels used in the industry. A36 carbon steel plate can be riveted, bolted, or welded in the construction of bridges and buildings, and for general structural purposes. We offer various thicknesses, lengths, and widths to meet your specifications.

ASTM A36 Hot Rolled Steel Plate | A36 Steel Plate | Buy ...

Buy Metal Online – A36 Hot Rolled Steel Plate – Order Large or Small Quantity Online – Cut to Size A36 Steel Plate – No Minimum Order. Discount Steel 1 ... Home » ASTM A36 Hot Rolled Steel Plate. ASTM A36 Hot Rolled Steel Plate ... ASTM: A36 (ASTM A36 / A36M - 08 Standard Specification for Carbon Structural Steel) Alloy: Commercial ...

ASTM A36 steel - steel-grades

ASTM A36, >8 to 15 in. thick, as-rolled steel plate. Categories: Metal; Ferrous Metal; ASTM Steel; Carbon Steel; Low Carbon steel Material Notes: A popular "workhorse" grade, it is used widely for various applications.[PDF]

Datasheet for Steel Grades Carbon Steel ASTM A36

Datasheet for Steel Grades Carbon Steel ASTM A36 ASTM A36 Standard Number: ... W N Cu Co Pb B Nb Al Ti Other ASTM A36, >8 to 15 in. thick, as-rolled steel plate Categories: Metal; Ferrous Metal; ASTM Steel; Carbon Steel; Low Carbon steel ... Coil / Strip Steel Coil /Steel Strip 0.03-16.0x1200mm Cold-Rolled & Hot-Rolled Annealed, Solution and ...

Astm A36 Hot Rolled H Steel Carbon Steel Sheet Astm A36 ...

Astm A36 Hot Rolled H Steel Carbon Steel Sheet Astm A36 , Find Complete Details about Astm A36 Hot Rolled H Steel Carbon Steel Sheet Astm A36,Carbon Steel Sheet Astm A36,Carbon Steel Sheet Astm A36,Carbon Steel Sheet Astm A36 from Steel Sheets Supplier or Manufacturer-Shanghai Hengtie Steel Trading Co., Ltd.

ASTM A569 - Standard Specification for STEEL, SHEET AND ...

This specification covers hot-rolled carbon steel sheet and strip of commercial quality, in coils and cut lengths, having a maximum carbon of 0.15 percent. This material is intended for parts where bending, moderate forming or drawing, and welding may be involved.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.