Tel: +86-371-86151827

jd1 cold rolled steel sheet in

Steel grade:jd1 cold rolled steel sheet in

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

jd1 cold rolled steel sheet in Introduction

BLD-JD1, BLD-JD1 cold rolled steel sheet | Shanghai Royal ...

Available range of BLD-JD1 cold-rolled steel sheet for appliances: Item: Nominal size. Thickness. 0.25-3.5. Width. 800-1830. Length. Steel plate. 1000-6000. Steel strip. Coil inside diameter 508、610. You can contact salesmen from Shanghai Royal Industry to know more details about BLD-JD1 cold-rolled steel sheet for appliances as the following ...

BLC-JD1, BLC-JD1 cold rolled steel | Shanghai Royal Industry

BLC-JD1 cold-rolled steel sheet mechanical properties: a when there is no significant yield, RP0.2, otherwise ReL should be used. b the sample is the P14 sample …

Cold Rolled Steel - Metal Supermarkets

Cold rolled steel is essentially hot rolled steel that has had further processing. The steel is processed further in cold reduction mills, where the material is cooled (at room temperature) followed by annealing and/or tempers rolling. This process will produce steel with closer dimensional tolerances and a wider range of surface finishes.

What’s the Difference Between Hot and Cold Rolled Steel ...

To get cold rolled steel, manufacturers generally take cooled-down hot rolled steel and roll it more to get more exact dimensions and better surface qualities.

Cold Rolled Steel Coils & Sheets |China| Sinowell Metal

Cold Rolled Steel Coil. Sinowell Metal is at the vanguard of the cold rolled steel coils & sheets revolution. We use only the highest quality materials and put them through the most thorough and precise treatment regime on the market today. Known for durability, toughness, and malleability, our cold rolled steel coils and sheets are second to none.

Cold Rolled Steel Sheet & Coil | Alliance Steel

alliancesteel.net› ProductsCold rolled steel is rolled at room temperature, below its recrystallization temperature, which enables better control over finished product shape, thickness, dimensions and surface finish. Cold rolled steel is commonly used for applications in which dimensional tolerances, strength …

Discount Steel – Steel Sheet: Hot Rolled, Cold Rolled ...

Buy Metal Online – Steel Sheet: Hot Rolled, Cold Rolled, Galvanized – Order Large or Small Quantity Online – Cut to Size Steel Sheet – No Minimum Order

Cold Rolled Steel | Cold Rolled Coils | Cold Rolled Sheets

Cold Rolled Coils & Sheets JSW’s Cold Rolled Closed Annealed (CRCA) Coils and Sheets are produced through the cutting-edge Cold Rolling Mills (CRM) at Vijayanagar. The 3.3 Mtpa CRM’s modern facilities, advanced operational technologies, strict inspection processes and integrated quality control, ensures an excellent product.

Stainless Steel Sheets, Cold Rolled Steel & Galvanized ...

As a registered ISO 9001:2008 company, Rolled Steel Products state of the art equipment meets virtually any requirement in panel flat quality leveling, precision slitting, close tolerance sheet blanking, strip quality edge conditioning, precision shearing and complete cold reducing capabilities.

Cold Rolled Steel Sheet | Cold Rolled Steel Plate

Industrial Metal Supply Co. offers hot and cold rolled steel sheet and hot and cold rolled steel plate in a broad range of lengths, widths, gauges, alloys, and specifications to meet your material requirements. We stock steel sheet and plate in 36”, 48”, and 60” widths and in 96”, 120”, and 144” lengths.Location: Sun Valley, 91352, California

Cold Rolled Steel Sheet, Cold Formed Sheet Pile | JD ...

Cold Rolled Steel Sheet Piling. Cold rolled steel sheet can be found in various appliances and automobile parts, making it essential to many manufacturing companies. JD Fields offers competitive cold rolled steel prices thanks in part to our massive 150,000 ton inventory. Various types of cold formed sheet pile and cold rolled steel sheet are ...

Materials 101: Hot Rolled Steel vs. Cold Rolled Steel ...

Cold rolled steel sheets and strips are available in a couple of different conditions, including: full hard, half hard, quarter hard and skin rolled. The full hard condition reduces the thickness of the steel by as much as 50 percent, while the other conditions create less of a reduction.[PDF]

U003en Cold-Rolled Steel Sheets and Coils

1. General-Purpose Cold-Rolled Steel Sheets and Coils (JIS: G 3141) 3. Six Series of High-Strength Cold-Rolled Steel Sheets and Coils Classification Designation Characteristics Main Applications Commercial Quality SPCC SPCCT (*1) With commercial quality suitable for bending fabrication and simple forming, this is the type in the greatest demand.

Cold Rolled Steel Sheet, Cold Formed Sheet Pile | JD ...

Cold Rolled Steel Sheet Piling. Cold rolled steel sheet can be found in various appliances and automobile parts, making it essential to many manufacturing companies. JD Fields offers competitive cold rolled steel prices thanks in part to our massive 150,000 ton inventory. Various types of cold formed sheet pile and cold rolled steel sheet are...

Steel Dynamics, Inc. - Cold Rolled Steel Sheet

Our cold-rolled steel sheet has been cold-reduced to the specified thickness, and subsequently annealed and temper-rolled to achieve the desired characteristics. Alternately, customers may specify full-hard cold-rolled steel with off- gauge heads and tails cropped at the temper mill.

Hot Rolled vs Cold Rolled Steel | Metal Casting Blog

Cold rolled steel is essentially hot rolled steel that has been through further processing. Once hot rolled steel has cooled, it is then re-rolled at room temperature …[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Cold-Rolled Steel Sheets and Coils are extensively used as basic materials in automobiles, electrical appliances, steel office equipment, various types of containers, and numerous other products closely connected to our daily lives.

Cold-rolled weldable steel Sheet Metal at Lowes

Shop Cold-rolled weldable steel sheet metal in the structural hardware section of Lowes. Find quality sheet metal online or in store.

.048" (18 GA) COLD ROLLED STEEL SHEET A366/1008 - …

Cold Roll Mild Steel Sheet A366/1008 Part #: 14695. 0.048" (18 GA) A-366/1008 Cold Roll Sheet is commonly referred as the “commercial quality” of cold rolled steel sheets. It offers very good formability and comparatively high strength. Its surface finish makes it a better alternative to hot rolled steel.

Steel Coils for Sale | Hascall Steel Company

Cold Rolled. This type of steel is for either exposed or unexposed applications, which involve bending, forming, welding, or moderate drawing. A cold rolled metal coil is manufactured by removing rust from a hot rolled coil, soaking it in acid, then washing and drying the sheet. The sheet then passes through a reducing mill under pressure.

The Difference Between Hot Rolled Steel and Cold Rolled ...

Generally cold rolled steel, such as galvanizing and color steel, must be annealed, so the plastic and elongation rate is better, widely used in automobile, home appliance, hardware industries. The surface of the cold rolled sheet has a certain degree of finish, the …

Hot and Cold Rolled Steel Explained - MST Steel Corp

MST Hot Rolled Steel MST Cold Rolled Steel ROLLING (METALWORKING) In metalworking, rolling is a metal forming process in which metal stock is passed through one or more pairs of rolls to reduce the thickness and to make the thickness uniform. The concept is similar to the rolling of dough. Rolling is classified according to the temperature of the metal rolled.

Sheet Steel - Rolled Steel Products

As a registered ISO 9001:2008 company, Rolled Steel Products state of the art equipment meets virtually any requirement in panel flat quality leveling, precision slitting, close tolerance sheet blanking, strip quality edge conditioning, precision shearing and complete cold reducing capabilities.[PDF]

ColdRolledSheets - 欢迎访问iBaosteel

general production equipments of Cold Rolled Steel Sheet Mill are now of world advanced level and the design annual production capacity is one million. The products manufactured by this mill include cold rolled steel sheet in coil(450,000t/a), tinplate(350,000t/a), and tin free steel(200,000t/a), etc. Cold Rolled Steel Sheet 2

Cold Rolled Steel – Berlin Metals

berlinmetals› ProductsSteel chemistry, hot strip mill processing variables, pickling practices, cold-rolling mill practices, annealing practices, and finally, temper rolling practices all have a role in achieving the manufacture of top quality cold-rolled sheet products.

Steel Sheet - Cold Rolled Sheet Wholesaler from Nagpur

Wholesaler of Steel Sheet - Cold Rolled Sheet, Cold Rolled Steel Sheets, Hot Rolled Sheet and CR Sheets offered by JSK Corporation Private Limited, Nagpur, Maharashtra. Wholesaler of Steel Sheet - Cold Rolled Sheet, Cold Rolled Steel Sheets, Hot Rolled Sheet and CR Sheets offered by JSK Corporation Private Limited, Nagpur, Maharashtra.

Cold rolled stainless steel coil, strip and sheet | Outokumpu

Cold rolled coil, strip and sheet are produced in all stainless steel types: austenitic, ferritic, duplex and martensitic. A wide selection of standard and special surface finishes provide a unique level of …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.