Tel: +86-371-86151827

astm a841 grade a steel plate equivalent

Steel grade:astm a841 grade a steel plate equivalent

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a841 grade a steel plate equivalent Introduction

ASTM A841 / A841M - 17 Standard Specification for Steel ...

ASTM A841 / A841M-17, Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP), ASTM International, West Conshohocken, PA, 2017, astm.org. Back to Top

ASTM A-841/A-841M,ASTM A-841/A-841M TMCP steel …

A841 steel plate is produced by TMCP process. English | Spain. sousou. Home . About us . Products . Process . ... ASTM A-841/A-841M Steel Grade : A841 Dimension range :1.2mm -500mm x 1000mm-4000mm x 1000mm-18000mm MOQ: 1 PC ... ① If the carbon equivalent of the heat analyse is not more than 0.47%, the Mn composition of the heat analyse can be ...

ASTM A841 Grade A - Steel - Matmatch

ASTM A841 Grade A.XLSX.PDF. Save. Description. Primary standard name. ASTM A841 Grade A ... Equivalent standards are similar to one or more standards provided by the supplier. ... Contact our Material Scientists Send us a message. You may also like these materials. AA Grade 6061 T651. AISI 314 annealed plate. AISI 348 soft tempered wire. AIR ...

ASTM A841 Grade E steel material size-BBN STEEL sale steel ...

carbon steel plate,mild steel plate grade a and weight of 12mm thick weight q235b,a36, ss400, st37, s235jr-1 is supplied by ☆ carbon steel plate,mild astm a36 steel plate and 10mm thick steel plate thickness: 1mm-800mm, ASTM A841 Grade D Plates - View Specifications & Details ...

ASTM A841/A841M TMCP steel plates for pressure vessels ...

ASTM A841 Abstract: ASTM A841 covers steel plates produced by the thermo-mechanical control process (TMCP). The plates are intended primarily for use in welded pressure vessels. The steel shall be killed and shall conform to specified fine austenitic grain size and chemical composition requirements.

A841 Class1 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A841 Class1 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

ASTM A841 Grade A Plates, Astm Plate - indiamart

View ASTM A841 Grade A Plates, details & specifications from Aesteiron Steels LLP, a leading Manufacturer of Metal Plates in Bhuleshwar, Mumbai, Maharashtra. Get contact details, address, map on IndiaMART. | ID: 10568247555

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.

What is an ASTM A36 Steel equivalent? - Quora

A36 is a steel for carbon structure. It is a steel of American ASTM standard. ASTM A36 is equivalent to Q235 in the Chinese standard, but it cannot be directly replaced by Q235 because the Mn content and σs and σb of Q235 do not meet the requirements of A36.. If the diameter is less than or equal to 20 mm, it can be replaced by 20 steel; when the diameter is larger than 20 mm, 20Mn can be ...

ASTM A841 grade factory-BBN STEEL sale steel A285 Grade …

hot rolled ASTM A841 Grade D steel plate , vessel steel ... hot rolled ASTM A841 Grade D steel plate , BBN steel supply A387 Grade 12 Class 1 vessel steel Metal plate, hot rolled boiler steel A387 Grade 5 Class 1, A285 Grade C high strength vessel plate, A515 Grade 65 boiler steel and so on pressure vessel and boiler steel.

ASTM A841 Grade A - Steel - Matmatch

ASTM A841 Grade A.XLSX.PDF. Save. Description. Primary standard name. ASTM A841 Grade A ... Equivalent standards are similar to one or more standards provided by the supplier. ... Contact our Material Scientists Send us a message. You may also like these materials. AA Grade 6061 T651. AISI 314 annealed plate. AISI 348 soft tempered wire. AIR ...

A841 Class1 - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. A841 Class1 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

A841 steel plate,A841 steel sheet - JOIN WIN STEEL

A841 is a kind steel plates used to fabric multilayer pressure vessels. A841 steel plate is produced by TMCP process. Standard: ASTM A-841/A-841M Dimension range :1.2mm -500mm x 1000mm-4000mm x 1000mm-18000mm

ASTM A36 Steel Plate - A36 Carbon Steel Plate | Leeco ...

leecosteel› Steel Plate ProductsASTM A36 steel plate is one of the most widely used carbon structural steels used in the industry. It can be riveted, bolted or welded in the construction of bridges and buildings, and for general structural purposes. ASTM A36 is known to be an equivalent to EN S275 steel plate.

ASTM A841 Grade E steel material size-BBN STEEL sale steel ...

ASTM A841 / A841M - 17 Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) Steel Standards - ASTM International. List of steel standards developed by ASTM: ... Standard Specification for Grade 100 Alloy Steel Chain: Steel Forgings and Billets. Designation Title; A266 / A266M - 18: ...

ASTM-A841 | Standard Specification for Steel Plates for ...

ASTM-A841 Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) ... Except for Grade G, the plates may be formed and post-weld heat-treated at temperatures not exceeding 1200°F [650°C], providing the requirements of 6.1 are met.

ASTM A441 steel Physical Properties - BEBON STEEL

ASTM A441 steel Physical Properties ASTM A441 steel is a steel of Steel for Boilers and Pressure Vessels,Also Belong to Carbon steel.Bebon International offer A441 cash resources, there are plenty of A441 steel stock.Here, a brief introduction A441 Heat treatment,Physical Properties,chemical composition and mechanical properties of A441 steel.[PDF]

International Standards Comparison - LearnEASY

requirement than the corresponding AS1548-7-490 and equivalent grades. 3. Grade equivalence shown is based on room temperature tensile properties only. 4. Grades readily available from BlueScope Steel are shown in bold type. 5. *ASTM A662 Grade B & C are dual certified with AS1548-7-460 & 7-490 respectively, in thickness 8-40mm 6.

ASTM A572 Grade 50 - A572 Grade 42, 50, 60, 65 Steel ...

leecosteel› Steel Plate ProductsASTM A572 steel plate is used in a variety of structural applications including bridges, buildings, construction equipment, freight cars, machinery, truck parts and transmission towers. A572 steel plate is produced in five grades: 42, 50, 55, 60 and 65. Leeco Steel stocks all five grades at …

Steel Plate Grades - Continental Steel & Tube Company

ASTM A36 PLATE STEEL is a structural quality product designed for use in welded, bolted, or riveted fabrications such as oil rigs, buildings and bridges.Produced with a min. yield of 36,000 psi, A36 plate can be used in the construction of a variety of lightweight structures and equipment where good welding properties are important.

China A841 Grade A steel manufacture,A36,A36 steel plate ...

A588 Grade B weather steel with good corrosion resistance . 3 ASTM A841 Gr.B Class2 This grade is a new specifi cation of thermal-mechanical control process (TMCP) steel plates for pressure vessels possessing high yield strength, high charpy V-notch impact absorption energy at low temperatureDiffusion Engineers is the best infrastructure in industry that involves into the wide range …

Q235 Steel Plate Equivalent Steel Standard-ASTM A36

A36 steel plate is similar to Q235B steel plate, it is one Q235b equivalent steel standard, another one is SS400. ... SS400 and Q235 steel plate. Although the Q235 steel grade steel plate has lower mechanical properties than A36 and SS400 material, but in actual operation process, as long as the buyers do not have special requirement, often ...

Speedy Metals Information for ASTM A572 Grade 50 Plate

Grade 50 is used in general plate applications when the plate will be riveted, bolted, or welded. Grade 50 is a Columbium-Vanadium steel that offers a minimum yield of 50,000 PSI. In addition, ASTM A572 Grade 50 is noted for its increased resistance to atmospheric corrosion.

hot rolled A202 steel grade equivalent-BBN STEEL Pressure ...

A202 gr. A,B steel plate - steel plates - BEBON …ASTM A202 gr. A,B steel plate/sheet, A202 gr. A,B steel plate/sheet, under ASTM standard, we can regard A202 gr. ... intended particularly for welded boiler and other pressure vessel in steel grade A202 Grade A and A202 Grade B.A202 gr. A,B steel plate/sheet is one mainly of Steel for boiler steels.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.