Tel: +86-371-86151827

astm a633c low alloy steel sheet

Steel grade:astm a633c low alloy steel sheet

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

astm a633c low alloy steel sheet Introduction

Alloy Steel Sheets | McMaster-Carr

Choose from our selection of alloy steel sheets, including over 450 products in a wide range of styles and sizes. ... Sheets Aramid Fabric Sheets Aramid Gasket Sheets ASTM B152 Copper Sheets ASTM D2000 Rubber Sheets ASTM D4020 Polyethylene ... Drop Sheets Cotton Sheets CPVC Sheets Cubed Foam Sheets Damper-Convertible Low-Carbon Steel Sheets ...

ASTM/ASME,A633A,A633C,A633D,A633E STEEL PLATE- …

ASTM/ASME A633A,A633C,A633D,A633E's specification covers normalized or in an equivalent condition obtained by normalizing rolling high-strength low-alloy structural steel plates for welded,riveted or bolted construction.

ASTM A568 / A568M - 17a Standard Specification for Steel ...

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.. ASTM Standards. A370 Test Methods and Definitions for Mechanical Testing of Steel Products. A414/A414M Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels. A424 Specification for Steel, Sheet ...[PDF]

Data Sheet 1 ASTM A633 Grade E - SSAB

Heat-Treated (Normalized) Structural Steel Product Data Sheet 2012 04 01 Page | 1 ssab ASTM A633 Grade E Normalized High-Strength Low-Alloy Structural Steel Plate General Product Description ASTM A633 Grade E is a normalized high-strength low-alloy structural steel …

A633C low alloy steel plate - Henan BBN

About 100% of these are steel sheets. A wide variety of a633e low alloy high strength steel plate options are available to you, such as aisi, astm. ASTM/ASME,A633A,A633C,A633D,A633E STEEL PLATE- … ASTM/ASME A633A,A633C,A633D,A633E's specification covers normalized or in an equivalent condition obtained by normalizing rolling high-strength ...

A633 Offshore Steel Plate - ASTM A633 Steel Plate | Leeco ...

leecosteel› …› Offshore and Marine Steel PlateA633 steel plate is a normalized high-strength low-alloy structural steel plates for welded, riveted or bolted construction. A633 plate steel can be used for low ambient temperatures where the desired notch toughness is better than in as-rolled materials of comparable strength level.

Standard Specification for Normalized High-Strength Low ...

Abstract. This specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. This material is suited for low ambient temperatures where the desired notch toughness is better than that expected in as-rolled materials of comparable strength level.[PDF]

High-Strength Low-Alloy Steels - ASM International

High-Strength Low-Alloy Steels Introduction and Overview High-strength low-alloy (HSLA) steels, or microalloyed steels, are ... The HSLA steels in sheet or plate form have low carbon content (0.05 to ... Table 1 Compositional limits for HSLA steel grades described in ASTM specifications

ASTM A635 / A635M - 15 Standard Specification for Steel ...

2. Referenced Documents (purchase separately) The documents listed below are referenced within the subject standard but are not provided as part of the standard.. ASTM Standards. A370 Test Methods and Definitions for Mechanical Testing of Steel Products. A414/A414M Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels. A424/A424M Specification for Steel ...

Steel Standards - ASTM International

ASTM's steel standards are instrumental in classifying, evaluating, and specifying the material, chemical, mechanical, and metallurgical properties of the different types of steels, which are primarily used in the production of mechanical components, industrial parts, and construction elements, as well as other accessories related to them.

ASTM A633C alloy steel plate - Henan BBN

ASTM/ASME,A633A,A633C,A633D,A633E STEEL PLATE- … ASTM/ASME A633A,A633C,A633D,A633E's specification covers normalized or in an equivalent condition obtained by normalizing rolling high-strength low-alloy structural steel plates for welded,riveted or … Steel Grade Equivalency Table - SteelOrbis

ASTM A633 Marine & OffShore Steel Plate | BBN Steel

BBN Steel's A633 is a normalized high-strength low-alloy structural steel plate. BBN Steel's A633 is a normalized high-strength low-alloy structural steel plate. About CHAPEL STEEL. Career Portal ... Marine & OffShore Steel Plate. ASTM A633.

ASTM A607 - Standard Specification for Steel, Sheet and ...

scope: 1. Scope. 1.1 This specification covers high-strength, low-alloy columbium, or vanadium hot-rolled sheet and strip, or cold-rolled sheet, or combinations thereof, in either cut lengths or coils, intended for applications where greater strength and savings in weight are important.

Low Alloy High Strength Steel Plate A633e

Low alloy high strength steel plate A633 Grade E is in steel standard ASTM A633/A633M.For the thickness above 75mm,low alloy steel plate A633Gr.E need to be done double normalized.For steel plate A633GrE wider than 610mm,the elongation requirement is reduced two percentage points when rolling.Now Xinsteel can offer the maximum thickness for low ...

A633C low alloy steel plate - Henan BBN

About 100% of these are steel sheets. A wide variety of a633e low alloy high strength steel plate options are available to you, such as aisi, astm. ASTM/ASME,A633A,A633C,A633D,A633E STEEL PLATE- … ASTM/ASME A633A,A633C,A633D,A633E's specification covers normalized or in an equivalent condition obtained by normalizing rolling high-strength ...

ASTM-A635 | Standard Specification for Steel, Sheet and ...

ASTM-A635 › Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

A633 Alloy Steel Plate, A633 Alloy Steel Plate Suppliers ...

About 82% of these are steel sheets. A wide variety of a633 alloy steel plate options are available to you, such as astm, gb. You can also choose from free samples. There are 395 a633 alloy steel plate suppliers, mainly located in Asia. The top supplying country is China (Mainland), which supply 100% of a633 alloy steel plate respectively.

ASTM A1008/A1008M-16 - Standard Specification for Steel ...

ASTM A1008/A1008M-16 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved …

ASTM A36 Mild/Low Carbon Steel - Materials Engineering

ASTM A36 is the most commonly used mild and hot-rolled steel. It has excellent welding properties and is suitable for grinding, punching, tapping, drilling and machining processes. Yield strength of ASTM A36 is less than that of cold roll C1018, thus enabling ASTM A36 to bend more readily than C1018 ...

Delta Steel, Inc. - Plate

19% minimum in 2” (for plate 24” and wider) ASTM A633 GR E. A “normalized” high strength low alloy steel plate for construction. This product is suited for service at low ambient temperatures of -50oF (-45oC) and higher when notch toughness better than that expected in an “As-rolled” material of a comparable strength level is desired.

A633e Alloy Steel Plate, A633e Alloy Steel Plate Suppliers ...

Alibaba offers 478 a633e alloy steel plate products. About 82% of these are steel sheets. A wide variety of a633e alloy steel plate options are available to you, such as gb, aisi, and astm. You can also choose from free samples. There are 397 a633e alloy steel plate suppliers, mainly located in Asia.

steel plate low alloy steel plate price - vamosargentina.net

S355 Standard Low Alloy Steel Plate sheet Price. Shanghai Bebon Enterprises Co., Ltd is a steel plate manufacturing factory ,which is specialized in manufacturing carbon steel plate,low alloy steel plate, boiler steel plate,shipbuilding steel plate,Anti-corrosive steel plate,pipeline steel plate,etc.

High-strength low-alloy steel - Wikipedia

High-strength low-alloy steel (HSLA) is a type of alloy steel that provides better mechanical properties or greater resistance to corrosion than carbon steel.HSLA steels vary from other steels in that they are not made to meet a specific chemical composition but rather to specific mechanical properties.Classifications·

ASTM A635/A635M : Standard Specification for Steel, Sheet ...

ASTM A635/A635M : Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.