Tel: +86-371-86151827

0cr25ni20 steel plate p275 nl1

Steel grade:0cr25ni20 steel plate p275 nl1

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

0cr25ni20 steel plate p275 nl1 Introduction

P 275 NL1 - steel plates - BEBON INTERNATIONAL

Bebon International is a professional P 275 NL1 steel exporter and a steel Stockist in china. We keep more than 1000 tons P 275 NL1 steel in stock every month. If you want to get the P 275 NL1 steel price, please do not hesitate to contact us. Any need in P 275 NL1 Chemical Composition and Mechanical Properties, please feel free to contact us ...

EN 10028-3 P275 NL1 hot rolled steel plates, forged plates ...

EN 10028-3 P275 NL1 hot rolled steel plates, forged plates, forged bars steel plate Leave a Message Get a price EX-Stock Promotion Center Europe designation EN 10028-3 P275 NL1 steel shows that EN 10028-3 P275 NL1 steel has a minimum yield strength and should bear a …

EN 10028-3 Grade P275NL1,EN10028 P275 NL1 STEEL PLATE ...

EN 10028-3 Grade P275NL1,EN10028 P275 NL1 STEEL PLATE. EN10028 steel grade supersedes the older BS and DIN standards. P275NL1 steel grade is one of grade in En10028-3, which is non alloy and alloy steels with specified elevated temperature properties. P275NL1 grades are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids.

supplier of characteristics for plate p275 nl1,A36,Q235B ...

EN 10028:3 P355NL1 | P355NL2 - Brown McFarlaneIt has three steel grades (P275, P355, and P460) which indicate each grade’s minimum yield strength (in MPa) for plates 16 mm thick and below. These are further subdivided on the basis of impact testing (transverse) temperature: N and NH indicate impact testing at -20 deg C or above, NL1 at -40 deg C or above, and NL2 at -50 deg C or above.

supplier of plate p275 nl1,A36,Q235B,Q345B steel plate ...

EN 10028-3 P275 NL1 steel plate/sheet, P275 NL1 steel . A516 Gr 60 steel plate is a kind of carbon steel with specifications for pressure vessel plates and moderate or lower temperature service.A516 Gr 60 steel plate is intended primarily for service in welded pressure vessels where improved notch …

p 275 nl1 - pressure vessel steel plate grades - thehandler.nl

EN 10028-3 Grade P275NL1,EN10028 P275 NL1 STEEL PLATE . en 10028-3 grade p275nl1,en10028 p275 nl1 steel plate EN10028 steel grade supersedes the older BS and DIN standards. P275NL1 steel grade is one of grade in En10028-3, which is non alloy and alloy steels with specified elevated temperature properties.

P275 NL1 SUPPLIER - pressure vessel steel plate grades

supplier of P275 NL1 steel,A36,Q235B,Q345B steel plate Home >Product list > P275 NL1 steel. p235gh Boiler and Pressure Vessel Steel Plate. P235GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P235GH is weldable fine grain steel. density of P275 NL1 - pressure-vessel-steel

EN 10028-3 P275 NL1 steel plate/sheet, P275 NL1 steel ...

EN 10028-3 P275 NL1 steel. Email:[email protected] P275NL1 steel plate Introduction and application: P275NL1 steel plate in a boiler and pressure vessel steel, P275NL1 steel plate have definite characteristic, have very good solderability. P275NL1 steel plate is mainly used for manufacturing boiler and pressure vessel, also can make ...

EN 10028-3 P275 NL1 steel plate/sheet, P275 NL1 steel ...

EN 10028-3 P275 NL1 steel. Email:[email protected] P275NL1 steel plate Introduction and application: P275NL1 steel plate in a boiler and pressure vessel steel, P275NL1 steel plate have definite characteristic, have very good solderability. P275NL1 steel plate is mainly used for manufacturing boiler and pressure vessel, also can make ...

P275 NL1 SUPPLIER - pressure vessel steel plate grades

supplier of P275 NL1 steel,A36,Q235B,Q345B steel plate Home >Product list > P275 NL1 steel. p235gh Boiler and Pressure Vessel Steel Plate. P235GH is a kind of material for pressure purpose. The normal delivery condition is Normalizing. P235GH is weldable fine grain steel. density of P275 NL1 - pressure-vessel-steel

p 275 nl1 - pressure vessel steel plate grades - thehandler.nl

EN 10028-3 Grade P275NL1,EN10028 P275 NL1 STEEL PLATE . en 10028-3 grade p275nl1,en10028 p275 nl1 steel plate EN10028 steel grade supersedes the older BS and DIN standards. P275NL1 steel grade is one of grade in En10028-3, which is non alloy and alloy steels with specified elevated temperature properties.

p 275 nl1 steel - pressure-vessel-steel

EN 10028-3 P275 NL1 hot rolled steel plates, forged plates, forged bars. P275 NL1 steel manufacturer in China - BEBON STEEL. P275 NL1 steel manufacturer in China. P275NL1/P275NL2 steels are non-alloy quality steels under specified requirements for flat products for pressure equipment. EN 10028-3 P275 NL1 steel plate/sheet, P275 NL1 steel ...

P355NH, P355NL1, P355NL2 Pressure Vessel Steel plate

P355NH, NL1 & NL2 – pressure vessel steels used by the worlds leading fabricators supplying the oil and gas industry. A pressure vessel steel grade with good weld ability and high resistance to brittle cracking, P355NH is used by the world's fabricators for the manufacture of pressure vessel tanks for the storage of pressurized gases.

EN 10028-3 P275 NL1 steel plate/sheet, P275 NL1 steel ...

EN 10028-3 P275NL1 steel plate in a boiler and pressure vessel steel,Bebon International P275NL1 steel plate stock to you, any need in P275 NL1 steel plate Normalizing , welcome to the advisory.

p275 nl1 steel - carbon-steeltube

we promise we can offer you the qualified p275 nl1 steel at the competitive price and rapid delivery time.We can produce as our customer's requirement.We keep many p275 nl1 steel stock in our warehouse, So hereby, we sincerely hope you join us, let's join hands to make you be the No.1 in your local steel market.

p 275 nl1 steel - carbon-steeltube

EN 10028-3 P275 NL1 steel plate/sheet, P275 NL1 steel ... EN 10028-3 P275NL1 steel plate in a boiler and pressure vessel steel,Bebon International P275NL1 steel plate stock to you, any need in P275 NL1 steel plate Normalizing , welcome to the advisory. density of P275 NL1 - pressure-vessel-steel.

EN 10028-3 Grade P275NH,EN10028 P275 NH STEEL PLATE__Steel ...

EN 10028-3 Grade P275NH,EN10028 P275 NH STEEL PLATE. EN10028 steel grade supersedes the older BS and DIN standards. P275NH steel grade is one of grade in En10028-3, which is non alloy and alloy steels with specified elevated temperature properties. P275NH grades are used above all for manufacturing boilers, pressure vessels and pipes transporting hot liquids.

density of p275 nl2 steel - w3s.in

China steel plate supplier P275NH data sheetSteel Plate ... Pressure Vessel Steel-EN 10028 P275 distributor, Source . Aesteiron Steels Pvt Ltd-As a popular distributor Pressure Vessel Steel-EN 10028 P275 , we export a wide variety of Pressure Vessel Steel-EN 10028 P275 in all over India and overseas, exporting best quality Pressure Vessel Steel-EN 10028 P275 to our clients.

p-355 nh steel plate - Mild Cold Rolled steel plate

Steel Plate, P275 N, Nh, Nl1, Nl20 , P355 N, Nh, Nl1, Nl2 . Steel plate [2989] Steel Plate P275 Nl1 Photos Catalog Steel Plate P275 Nl1 Business Cards Steel Plate P275 Nl1 Members Directory Steel Plate P275 Nl1 Videos Steel Plate P275 Nl1 email alerts Offers to …

EN 10028 P355NH, P355NL1, P355NL2 Steel plate

EN 10028 P355NH, P355NL1, P355NL2 Steel plate Category: Carbon steel material Model: P355NH, NL1 & NL2 – pressure vessel steels used by the worlds …

Steel plates | AMI Export-Import d.o.o. - amidoo.rs

Pressure Vessel& Boiler Plates of Fine-Grain Steel acc. to EN 10028-3. P275 NH, NL1, NL2 P355 NH, NL1, NL2 P460 NH, NL1, NL2. Steel grades EN 10028-4: 12Ni14 X12Ni5 X8Ni9 +QT640. Plate tickness: 5-150 mm ( depending on steel grade and width) ... STEEL PLATES WITH HIGH YIELD STRENGHT FOR LOW TEMPERATURE ACC DIN EN 10149.

p275 steel steel - Carbon steel,Alloy steel,Spring steel ...

P275 NL1 steel plate application - BEBON STEEL. Bebon international, an authorized P275 NL1 steel manufacturer and supplier offers P275 NL1 steel for a long time and has won good reputations in steel exporting field. EN 10028-3 P275 NL1 steel plate/sheet, P275 NL1 steel …

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.