Tel: +86-371-86151827

0 8mm astm a633m steel alloy plate

Steel grade:0 8mm astm a633m steel alloy plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

0 8mm astm a633m steel alloy plate Introduction

Steel Plate ASTM A633/A633M Grade A B C D in Large Stock

Steel Plate ASTM A633/A633M Grade A B C D in Large Stock. Mechnical and chemical properties of ASTM A633Grade A C max Si Mn P S Mo Ni 0.18 0.15-0.50 1.00-1.35 0.035 0 ...

ASTM A633/A633M - steel-plate-sheets

astm a633/a633m Main Application: Carbon and Low-alloy High-strength Steel Plate is Widely Used In Construction of Bridges, Riveted, Bolted, And Other Structural Elements Included Drilling Machine, Power Shovel, Electricity Drive Wheel Counter- Mine Trolley, Mineral Product Automobile, Excavator, Car …

ASTM A633 Grade D high strength low alloy steel plate ...

ASTM A633 Grade D high strength low alloy steel plate have minimum yield point of 50ksi [345MPa] in thicknesses up to 2.50 in. [65mm], inclusive and 46ksi [315MPa] in thickness over 2.50 in. to 4.0 in. [65mm to 100mm], inclusive. ASTM A633 Grade D high strength low alloy steel plate shall do normalizing according to technical standard ASTM A633 ...[PDF]

ASTM A633-A633M | Steel Plate, Steel Bar, Steel Tubes …

ASTM A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates. ASTM A633/A633M specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. ASTM A633/A633M Standard main steel grade: ASTM A633Grade A,C,D,E (A633GRA, A633GRC, A633GRD, A633GRE)

Give You Our Best Carbon Steel Plate ASTM A633 Grade C ...

ASTM A633 grade (Gr) C is carbon and low alloy steel plate. ASTM A633 grade (Gr) C low alloy carbon steel plate can be stocked about 5000 tons per month by us. we have five department which have different charge in exporting steel. ASTM A633 HSLA Steel Grade A, Thickness 100 mm (4 in.)

Standard Specification for Normalized High-Strength Low ...

Abstract. This specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. This material is suited for low ambient temperatures where the desired notch toughness is better than that expected in as-rolled materials of comparable strength level.

ASTM A633/A633M : Standard Specification for Normalized ...

ASTM A633/A633M : Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates ... Grade E provides a minimum yield point of 60 ksi [415 MPa] in thicknesses up to 4.0 in. [100 mm], inclusive and 55 ksi [380 MPa] in thicknesses over 4 in. [100 mm].

ASTM A633 E mild steel plate - gofschools.org

A633GrE,A633 Grade E,A633GrE PLATE . Low alloy high strength steel plate A633 Grade E is in steel standard ASTM A633/A633M.For the thickness above 75mm,low alloy steel plate A633Gr.E need to be done double normalized.For steel plate A633GrE wider than 610mm,the elongation requirement is reduced two percentage points when rolling.Now Xinsteel can offer the maximum thickness for low alloy steel ...

ASTM-A633 | Standard Specification for Normalized High ...

This specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. This material is suited for low ambient temperatures where the desired notch toughness is better than that expected in as-rolled materials of comparable strength level.

Give You Our Best Carbon Steel Plate DIN WStE500 low alloy ...

ASTM A633/A633M - steel-plate-sheets. astm a633/a633m Main Application: Carbon and Low-alloy High-strength Steel Plate is Widely Used In Construction of Bridges, Riveted, Bolted, And Other Structural Elements Included Drilling Machine, Power Shovel, Electricity Drive Wheel Counter- Mine Trolley, Mineral Product Automobile, Excavator, Car …

ASTM A633 Grade A C D E for Sale - steelplatecuttingpart

ASTM A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates. ASTM A633/A633M specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. ASTM A633/A633M Standard main steel grade: ASTM A633Grade A,C,D,E (A633GRA, A633GRC, A633GRD, A633GRE)

A633GrE,A633 Grade E - Mild steel plate,shipbuilding steel ...

Low alloy high strength steel plate A633 Grade E is in steel standard ASTM A633/A633M.For the thickness above 75mm,low alloy steel plate A633Gr.E need to be done double normalized.For steel plate A633GrE wider than 610mm,the elongation requirement is reduced two percentage points when rolling.Now Xinsteel can offer the maximum thickness for low alloy steel plates can reach 350mm …

ASTM A633/A633M-18 - techstreet

ASTM A633/A633M-18 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates ... [415 MPa] in thicknesses up to 4.0 in. [100 mm], inclusive and 55 ksi [380 MPa] in thicknesses over 4 in. [100 mm]. 1.4 ... Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates[PDF]

ASTM A633-A633M | Steel Plate, Steel Bar, Steel Tubes …

ASTM A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates. ASTM A633/A633M specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. ASTM A633/A633M Standard main steel grade: ASTM A633Grade A,C,D,E (A633GRA, A633GRC, A633GRD, A633GRE)

supplier of astm a633 gr e,A36,Q235B,Q345B steel plate ...

A633 Offshore Steel Plate - ASTM A633 Steel Plate | Leeco . A633 steel plate is a normalized high-strength low-alloy structural steel plates for welded, riveted or bolted construction. A633 plate steel can be used for low ambient temperatures where the desired notch toughness is better than in as-rolled materials of comparable strength level.

supplier of astm a633 d,A36,Q235B,Q345B steel plate ...

ASTM A633 Grade D high strength low alloy steel plate . ASTM A633 Grade D high strength low alloy steel plate shall do normalizing according to technical standard ASTM A633/ A633M. Further, thermomechanical control,or appropriate heat treatment may be applied upon the purchase according to client requirement and the project condition.[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

Hot Sale Astm A633 Low Alloy Steel Plate - w3s.in

Hot Sale Astm A633 Gr e Low Alloy Steel PlateDelta Steel, Inc. - Plate. astm a633 gr e A “normalized” high strength low alloy steel plate for construction. This product is suited for service at low ambient temperatures of -50oF (-45oC) and higher when notch toughness better than that expected in an “As-rolled” material of a …

SA633 Grade D carbon and low-alloy steel in Bengal

ASTM A633 Grade D high strength low alloy steel plate ... ASTM A633 Grade D high strength low alloy steel plate have minimum yield point of 50ksi [345MPa] in thicknesses up to 2.50 in. [65mm], inclusive and 46ksi [315MPa] in thickness over 2.50 in. to 4.0 in. [65mm to 100mm], inclusive.

A633GrE,A633 Grade E - Mild steel plate,shipbuilding steel ...

Low alloy high strength steel plate A633 Grade E is in steel standard ASTM A633/A633M.For the thickness above 75mm,low alloy steel plate A633Gr.E need to be done double normalized.For steel plate A633GrE wider than 610mm,the elongation requirement is reduced two percentage points when rolling.Now Xinsteel can offer the maximum thickness for low alloy steel plates can reach 350mm …

A633GrA,A633 Grade A,A633GrA PLATE - Mild steel plate ...

ASTM A633 Grade A low alloy steel plate is mainly used in steel structures.This steel standard A633/A633M includes four different steel grades A633GrA,A633GrC,A633GrD and A633GrE.They have owned different chemical composition and mechanical property.Low alloy steel plate A633Gr.A owned the minimum yield strength at 290Mpa,and the tensile strength shall be within 430 …

China Low-Alloy Steel Plate and Sheet ASTM A516 Gr 70 ...

China Low-Alloy Steel Plate and Sheet ASTM A516 Gr 70, Find details about China Low-Alloy Steel Sheet and Plate, A516 Gr 70 Steel Plate and Sheet Price from Low-Alloy Steel Plate and Sheet ASTM A516 Gr 70 - Tianjin Tiangang Weiye Steel Tube Co., Ltd.

China 12mm Thick JIS G3101 Ss400 Carbon Steel Plates ...

Chengdu Derbo Steel Co., Ltd. Steel Plate, Carbon Plate, Carbon Steel Plate manufacturer / supplier in China, offering 12mm Thick JIS G3101 Ss400 Carbon Steel Plates, ASTM A105 Rtj Weld Neck Flange, Blind Flange, Dn300, Pn10, ASME B16.47, 2.5 Inch Hot-DIP Galvanized Pipe A53 Standard Steel …

ASTM-A633/A633M, 2013 - MADCAD

Description of ASTM-A633/A633M 2013 1.1 This specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, or bolted construction. 1.2 This material is particularly suited for service at low ambient temperatures of −50°F [−45°C] and higher where notch toughness better than that expected in as-rolled ...

MetalsDepot® - AR400 Plate | Abrasive Resistant Plate ...

AR400 F Steel Plate is formable grade of Abrasive Resistance Steel Plate designed to accomodate applications where a life of wear is the primary cause for failure among other grades of steel plate.AR400 abrasive resistance steel plate is intended for higher, impact, wear applications where cold-bending and very good weldability is important.

ASTM A633/A633M-18 - Standard Specification for …

ASTM A633/A633M-18 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates. 1.1 This specification covers normalized high-strength low-alloy structural steel plates for welded, riveted, ... [415 MPa] in thicknesses up to 4.0 in. [100 mm], inclusive and 55 ksi [380 MPa] in thicknesses over 4 in. [100 mm]. ...

construction material ASTM A633/A633M Carbon Steel …

construction material ASTM A633/A633M Carbon Steel Sheet kg price China Supplier, US $ 500 - 800 / Ton, AISI, ASTM, DIN, GB, JIS, ASTM A514, iron steel,carbon steel,mild steel,galvanized steel, 0.3-200mm.Source from Tianjin Tiangang Guanye Co., Ltd. on Alibaba. MENU MENU Alibaba ... Carbon and Low-alloy High-strength Steel Plate.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.