Tel: +86-371-86151827

painted coating g90 steel coil

Steel grade:painted coating g90 steel coil

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

painted coating g90 steel coil Introduction

Hot Dipped Galvanized Coatings: G140 vs. G90 vs. G60

Hot Dipped Galvanized Coatings: G90 vs G60. (2003)-- this entry appended to this thread by editor in lieu of spawning a duplicative thread Q. Evaluation of G60 vs G90 galvanizing with respect to cold formed metal framing (studs in exterior wall construction) and interior metal stud or other architectural components. Also for use in sheet metal work directly exposed to the elements.

Products - Majestic Steel USA

Pre-Paint. Prepainted (a.k.a. coil coated) steel is substrate that is painted on both sides simultaneously as a flat metal strip in a continuous, automated and extremely efficient process at high speeds.[PDF]

ASTM COATING WEIGHT DESIGNATION OF COATED …

ASTM Coating Weight Designation of Coated Sheet Steel for Construction Applications 3 minimum triple-spot average for one side and a single-spot minimum coating weight for the total of both sides. This ensures standards of uniformity. This is significant because typical applications require most of the corrosion protection on just one side.

ASTM A123 and G90 Specifications | American Galvanizer's ...

Mar 12, 2013· G90. First of all, G90 is not a galvanizing specification; it is a coating thickness designation in the galvanizing specification ASTM A653. This specification is for hot-dip galvanizing steel sheet using the continuous (high-speed) galvanizing process.Location: 6881 South Holly Circle, Suite 108, Centennial, 80112, Colorado

Prepainted Steel Sheet - Painted Steel Coil | Alliance Steel

alliancesteel.net› ProductsProtect against corrosion and pick your color with pre-paint steel products from Alliance Steel. Pre-paint steel is a bare metal substrate or corrosion resistant substrate that has had paint applied to both sides through a continuous coil coating process, which produces a uniform paint finish.

astm a653 g90 galvanized steel coil, View prepainted steel ...

steel strips and coils astm a 653 coil stainless metal sheet coil beauty steel for construction suppliers hot galvan roll suppliers hot rolled steel coil wuxi hot coil manufacturers equipment coil ss galvanized steel coil customized astm a526 galvanized steel coil assort coil manufactur suppliers circular coil suppliers dc zinc suppliers coils ...

Galvanized Steel – Berlin Metals

berlinmetals› ProductsThe “G” types are often coil coating with paint and are usually post formed by roll forming or embossing of the strip. Garage and entrance doors are examples of this practice. The “A” type is typically painted after all forming or bending is completed.[PDF]

GALVANIZED STEEL Grade Data Sheet - cmetals

GALVANIZED STEEL Grade Data Sheet ... Coating class G90 G30, G40, G60 Bending 5 Tension leveling Leveled Drawing NR Surface conditioning Not Skin-passed Skin passed, Pressing NR (paint line feed) Pittsburgh Lock Seam 4 ... ** Maximum thickness suitable for organic coil coating is 0.0575 ...

Coil & Sheet Metal | Leading Wholesale Distribuitor Of ...

Coil & Sheet Metal NB Handy maintains a breadth of metal inventory ready to service your HVAC fabrication needs. With over 80 standard stocked sizes of sheet and more than 20 varying widths of coils and slit coil, we can deliver galvanized, galvanneal, stainless and aluminum flat …

Coil Coating Process - Coil Lines - How To Paint Metal ...

The steel or aluminum substrate is delivered in coil form from the rolling mills. The metal coil is positioned at the beginning of the coating line, and in one continuous process, the coil is unwound, pre-cleaned, pre-treated, pre-primed, and prepainted before being recoiled on …

Galvanized Steel Sheet - Galvanized Steel Coil | Curtis ...

curtissteelco› Sheet & CoilCurtis Steel is the leading supplier of galvanized steel sheet & coil. Material types for galvanized coil & sheet steel include commercial steel, forming steel, deep drawing steel, structural steel & more. Our products are manufactured to meet ASTM A653 & ASTM A879 specifications. Learn more about galvanized steel & our product offerings by visiting our website.

Prepainted G90 Galvanized Steel, Prepainted ... - alibaba

Alibaba offers 358 prepainted g90 galvanized steel products. About 96% of these are steel sheets, 3% are steel strips, and 1% are metal building materials. A wide variety of prepainted g90 galvanized steel options are available to you, such as free samples.

Pre-finished Steel Coil and Flat Sheet - Coated Metals Group

Pre-finished Steel Coil and Flat Sheet. Coated Metals Group is a leading manufacturer of pre-finished steel coil and flat sheet to the building construction industry. Steel coils are processed to the customer’s precise specifications, including custom widths and exact lineal footages.

Prepainted Steel Sheet - Painted Steel Coil | Alliance Steel

alliancesteel.net› ProductsProtect against corrosion and pick your color with pre-paint steel products from Alliance Steel. Pre-paint steel is a bare metal substrate or corrosion resistant substrate that has had paint applied to both sides through a continuous coil coating process, which produces a uniform paint finish.[PDF]

GALVANIZED STEEL Grade Data Sheet - cmetals

GALVANIZED STEEL Grade Data Sheet ... Coating class G90 G30, G40, G60 Bending 5 Tension leveling Leveled Drawing NR Surface conditioning Not Skin-passed Skin passed, Pressing NR (paint line feed) Pittsburgh Lock Seam 4 ... ** Maximum thickness suitable for organic coil coating is 0.0575 ...

Paint Galvanized Pre Coating Thickness Gauge Steel Sheets ...

Hot Dipped Galvanized Coatings: G140 vs. G90 vs. G60. ... Colour coated, or pre-painted, steel, is steel coil to which a paint, powder or film coating has been applied in a continuous process prior to it being cut and shaped. It provides a durable uniform surface finish, and .

astm a653 g90 galvanized steel coil, View prepainted steel ...

steel strips and coils astm a 653 coil stainless metal sheet coil beauty steel for construction suppliers hot galvan roll suppliers hot rolled steel coil wuxi hot coil manufacturers equipment coil ss galvanized steel coil customized astm a526 galvanized steel coil assort coil manufactur suppliers circular coil suppliers dc zinc suppliers coils ...

What is Galvanized Steel? Galvanized Steel Sheet and ...

The most common method of galvanizing steel is the hot dip galvanized process. Camden Yards Steel carries a wide variety of galvanized steel products including galvanized steel sheet, galvanized steel coil, and galvanized steel slit coil in G30, G40, G60, and G90 coating weights chem treat dry.

China Dx53D G90 Color Coated Painted Steel Coil for Gutter ...

China Dx53D G90 Color Coated Painted Steel Coil for Gutter, Find details about China Prepainted Steel Coil, Ral Color Coated Coil from Dx53D G90 Color Coated Painted Steel Coil for Gutter - Jinan Sino Steel …

A653 CS Type B G90 Galvanized Sheet

Results 1 - 25 of 28 Browse ASTM A653 Hot Dipped Galvanized Steel in the MST Steel Corp. catalog including Item #,Steel Type,Minimum Yield Strength. Available in 50G/50G, 60G/60G, 70G/70G, 90G/90G, G30, G40, G60 and G90 coatings ASTM653-CS …

Prepainted metallic-coated steel sheet for building panels ...

Prepainted metallic-coated steel sheet for buildings has been used successfully for many years. One indicator of its popularity is the large number of roofs made with prepainted steel in place across Canada and throughout the world.

Hot Dip Galvanize Steel - Zero Spangle Galvanized Steel ...

Manufacturer of Hot Dip Galvanize Steel - Zero Spangle Galvanized Steel Coil, Galvalume Steel Coils, Galvanized Steel Strips and Galvanized Strip offered by J. K. Steel Strips LLP, Mumbai, Maharashtra. ... The 55% Al-Zn coating gives excellent paint adhesion for both pre-painting (continuous coil coating) and post-painting if required.

Coated Metals Group - Pre-Finished Steel Products

Coated Metals Group expands into the Nashville market and names Joe Ley as General Manager NASHVILLE, TN–Coated Metals Group (CMG) has expanded its operations by opening a new branch facility in the Nashville-Metro area.[PDF]

TT ee cc hh nn iicc aa ll BB uu llllee ttiinn ... - U.S. Steel

exposure testing on G90 HDG coated steel sheet. The length of time to red rust is proportional to the thickness of the zinc coating. For heavy gauge steel, thicker HDG coatings are available that can provide the proportionally longer usable lifetimes that many applications require.

Differences Between Galvalume And Galvanized In Metal ...

One of the questions most frequently asked by architects is: What are the differences between Galvalume and Galvanized Steel when used in roofing. It comes up so often, we thought we’d take a few minutes and use this week’s blog to explain those differences. First, a little bit of background.

Products | SteelCo USA - phone (909)393-8405

products all products available in sheet, coil and slit coil. • galvanized • bonderized • cold rolled • aluminized steel • electro galvanized steel • a606-4 cold rolled steel • zincalume • jet kote • painted polyester • painted smp • painted kynar • stainless steel • pvc 4x4 • aluminum h14 3003

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.