Tel: +86-371-86151827

zn to fe alloy high strength sheet metal steel algeria

Steel grade:zn to fe alloy high strength sheet metal steel algeria

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

zn to fe alloy high strength sheet metal steel algeria Introduction

Zn fe Alloy High Strength Density Of Galvanized Steel Sheet

[PDF] Designation:A 653/A 653M–08 Designation: A 653/A … 3.2.3 high strength low alloy steel, n— a specific group of sheet steels whose strength is achieved through the use of microalloying elements such as columbium (niobium), vanadium, titanium, and molybdenum resulting in improved formability and weldability than is obtained from conventional carbon-manganese steels.

Zn fe Alloy High Strength Galvanized Steel Wall Panel

Weldability is superior to that of normal zinc coated steel sheets due to Zn-Fe alloy coating. Same weldability as cold rolled sheets under proper welding conditions. ... JFE GALVAZINC for hot rolled base metal used (High strength steel) ... JFE GALVAZINC ALLOY HOT DIP GALVANIZED STEEL SHEET…

Zn fe Alloy High Strength Specific Weight Of Steel

Zn fe Alloy High Strength Specific Weight Of Steelspecific weight metal and alloy - themeter.net. table of specific weight metal and alloy. specific weight of material and characteristic data of beam and structural steel. Electrodeposition of Zn–Ni, Zn–Fe and Zn–Ni–Fe alloys ...

Zn fe Alloy High Strength Specific Weight Of Steel

The lowest corrosion rate in each alloy system (214, 325 and 26 μm year −1 for Zn–Ni, Zn–Fe and Zn–Ni–Fe, respectively) was characteristic of coatings deposited at 30, … ArcelorMittal Usibor® 22MnB5 Ultra high strength steel ...[PDF]

TS590 980 MPa Grade Low-Carbon Equivalent Type ...

High strength galvannealed (GA) sheet steels have been developed for the improvement of weight reduction, crash-worthiness and anti-corrosion properties of an auto body. In general, the strengthening of GA steel can be realized through the addition of alloy elements although Zn coating properties and spot weldability are affected at the same time.

(PDF) New generation of high strength aluminum casting …

The effect of high-temperature radial-shear rolling (RSR) on the structure formation and mechanical properties of a new high-strength aluminium alloy based on the Al-Zn-Mg-Ni-Fe system was ...

Sheets - 310S Sheets Manufacturer from Mumbai

We offer wide range of steel coils, stainless steel coils, nickel alloy coils, duplex steel coils, carbon steel coil, industrial coils and many more. These coils are also used to cure of abnormal blood vessels.

Aluminium alloy - Wikipedia

Aluminium alloys (or aluminum alloys; see spelling differences) are alloys in which aluminium (Al) is the predominant metal. The typical alloying elements are copper, magnesium, manganese, silicon, tin and zinc.There are two principal classifications, namely casting alloys and wrought alloys, both of which are further subdivided into the categories heat-treatable and non-heat-treatable.Engineering use and ...·

Zinc Alloys - Belmont Metals

Featuring pure Zn shot for precious metal alloying and other uses; Zn plating anodes; Superdie and other Zn alloys for rubber-mold and permanent mold casting, ultrasonic solders. Special high grade Zn, ACS reagent grade Zn, Zamak die casting alloys, ZA alloys, galvanizing brightener alloys, crusher alloy, slush alloys, plates, and rods.[PDF]

Coated Steel Sheets - Nippon Steel & Sumitomo Metal

Coated Steel Sheets of Nippon Steel & Sumitomo Metal Corporation weldability, paintability, and various other properties as ... Zn-Si-Ni alloy coated steel sheet and strip Nickel Coated Steel Sheet and strip Topcoat Base metal Zn Hot-dip zinc-aluminum- ... Base metal Zn-Fe alloy …

Chapter 8 Nonferrous Metals Flashcards | Quizlet

Gilding metal is the softest type of brass commonly available. An alloy of 95% copper and 5% zinc, gilding metal is typically used for ammunition components. High brass, contains 65% copper and 35% zinc, has a high tensile strength and is used for springs, screws, rivets. Leaded brass is an alpha-beta brass with an addition of lead.

Zn fe Alloy High Strength Specific Weight Of Steel

The lowest corrosion rate in each alloy system (214, 325 and 26 μm year −1 for Zn–Ni, Zn–Fe and Zn–Ni–Fe, respectively) was characteristic of coatings deposited at 30, … ArcelorMittal Usibor® 22MnB5 Ultra high strength steel ...

Formation of zinc interlayer texture during dissimilar ...

Ultrasonic spot welding (USW) of AZ31B-H24 magnesium alloy sheet to high strength low alloy (HSLA) steel sheet with a zinc interlayer was successfully achieved. Thin layer of intermetallic compounds (IMCs) of Mg 7 Zn 3 , Mg 2 Zn 11 and MgZn 2 were present at the interface between magnesium and zinc substrate, while at the other interface (iron ...[PDF]

JFE GALVAZING ALLOY - JFE Steel Galvanizing

JFE GALVAZINC ALLOY JFE GALVAZINC ALLOY is a Zn-Fe alloy coated steel sheet produced through hot dip galvanizing and annealing process which provides excellent levels of paint adhesion, corrosion resistance, and weldability.

(PDF) New generation of high strength aluminum casting alloys

The effect of high-temperature radial-shear rolling (RSR) on the structure formation and mechanical properties of a new high-strength aluminium alloy based on the Al-Zn-Mg-Ni-Fe system was ...[PDF]

Ultrasonic Spot Welding of Aluminum to High-Strength …

Ultrasonic Spot Welding of Aluminum to High-Strength Low-Alloy Steel: Microstructure, Tensile and Fatigue Properties V.K. PATEL, S.D. BHOLE, and D.L. CHEN

Development of heat-treatable Al-5Mg alloy sheets with the ...

For a non-heat-treatable Al-5Mg alloy sheet, Zn was selected as an additive for precipitate hardening in the alloys. As the Zn content increases to 5 wt%, for recrystallized sheets, a high elongation to failure, along with the high tensile strength, was observed due to the activities of deformation band formation and grain boundary sliding.

Sheets - 310S Sheets Manufacturer from Mumbai

We offer wide range of steel coils, stainless steel coils, nickel alloy coils, duplex steel coils, carbon steel coil, industrial coils and many more. These coils are also used to cure of abnormal blood vessels.[PDF]

Effects of zinc coating on magnesium alloy–steel joints ...

of Zn on the galvanised steel sheet improves wettability but decreases tensile strength. Aluminium has a high affinity for Fe, and the thinner layer of Fe–Al improves the mechanical properties of the Mg alloy–bare steel joint.

Low-alloy High-strength Steel, Low-alloy High-strength ...

There are 4,875 low-alloy high-strength steel suppliers, mainly located in Asia. The top supplying countries are China (Mainland), India, and Malaysia, which supply 98%, 1%, and 1% of low-alloy high-strength steel respectively. Low-alloy high-strength steel products are most popular in Southeast Asia, Mid East, and South America.

Magnesium Aluminum Zinc Alloy | AMERICAN ELEMENTS

Magnesium Aluminum Zinc Alloys are a common type of heat-treatable commercial alloy often used in structural components and metallurgical coatings due to their light weight and high resistance to corrosion. American Elements manufactures magnesium aluminum zinc in varying ratios such as high magnesium (96% Mg, 3% Al, 1% Zn, and 93% Mg, 6% Al, 1% Zn - also known as magnesium alloy AZ61A), high ...[PDF]

Technical Report SOC-free, Zn–Sn–Ni-alloy-coated Steel ...

NIPPON STEEL & SUMITOMO METAL TECHNICAL REPORT No. 108 MARCH 2015 ... Coated steel sheets for electronic devices are required in addi-tion to high strength and corrosion resistance for use in device bod-ies in order to have good surface electric conductivity and solder- ... Zn-Sn-Ni alloy coated steel sheet produced by thermal diffusion of ...

High strength steel plate steel sheet Q690E - mielemetal

pickled stainless steel flat bar 201; JIS S50C AISI 1050 DIN CK50 1.1206 Carbon Steel sheet; A1011/1018 CS Type B hot rolled sheet; Cu-Zn-Fe alloy copper coil; carbon steel sheet; TX-0040 copper coil; duplex 2205 cold rolled sheet; AISI 5145 carbon steel for China manufactory price; Steel plate market price today

Aluminum 5005 - Continental Steel & Tube Company

Continental Steel stocks and sells Aluminum 5005 in many different shapes and sizes such as plate, tube, wire, rods, and sheet. All of the Aluminum 5005 available from Continental Steel meets many of the leading industry specifications like ASTM, MIL, DIN, QQ, SAE, and UNS.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.