Tel: +86-371-86151827

hot rolled aisi 1008 carbon steel plate

Steel grade:hot rolled aisi 1008 carbon steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

hot rolled aisi 1008 carbon steel plate Introduction

Hot Rolled Carbon – Olympic Steel

olysteel› ProductsOlympic Steel boasts a broad range of hot rolled coil, sheet and plate steel products and grades in inventory; in both Hot Roll dry and Pickled and Oiled (P&O), automotive grades, Advanced High Strength Steels (AHSS), High Strength Low Alloys (HSLA) in both ASTM and AISI standards, as well as branded products COR-TEN®, DOMEX ™, EX-TEN®, FREMAX® steel products and more.

ASTM A36 Carbon Steel vs. Hot Rolled SAE-AISI 1008 ...

Both ASTM A36 carbon steel and hot rolled SAE-AISI 1008 are iron alloys. Their average alloy composition is basically identical. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown.

AISI 1008 steel - steel-grades

Stainless Steel, Special Steel, Compressor Blading, Turbine Blading, Superalloy Supplier. AISI 1008 can be supplied as steel plate/ sheet, round steel bar, steel tube/pipe, steel stripe, steel billet, steel ingot, steel wire rods. electroslag, forged ring/ block,etc.

Rolled Metal Products | Stainless, Aluminum & Specialty ...

AISI 1008 carbon steel is primarily used in extruded, cold headed, cold upset, and cold pressed parts and forms. AISI 1008 in the cold rolled condition is used for exposed or unexposed parts where bending, moderate drawing, forming and welding may be involved.[PDF]

Datasheet for Steel Grades Carbon Steel AISI 1008

AISI 1008 Heat Treatment Regime Annealing Quenching Tempering Normalizing Q & T √ √ √ √ √ AISI 1008 Range of products Product type Products Dimension Processes Deliver Status Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting Steel Bar ...

Astm 1008 Hot Rolled Carbon Steel Plate, Astm 1008 Hot ...

Alibaba offers 515 astm 1008 hot rolled carbon steel plate products. About 78% of these are steel sheets, 1% are stainless steel sheets. A wide variety of astm 1008 hot rolled carbon steel plate options are available to you, such as aisi, astm, and din.

Hot Rolled 1008 Carbon Steel :: MakeItFrom

Hot rolled SAE-AISI 1008 is SAE-AISI 1008 steel in the hot worked condition. The graph bars on the material properties cards below compare hot rolled SAE-AISI 1008 to: wrought carbon or non-alloy steels (top), all iron alloys (middle), and the entire database (bottom).

Hot Rolled Steel Sheet manufacturer - quality Hot Rolled ...

Hot Rolled Steel Sheet. LR BV Hot Rolled Pickled And Oiled Steel Sheet Stainless Steel Sheet 304. Weather Resistant Hot Rolled Steel Sheet HRC Plate GB Equivelant Standard. Commercial 1500MM HR Hot Rolled Sheet Steel ASTM JIS Low Carbon. Hot Rolled Steel Plate. A572GR50 Q345B S355JR Low Alloy Hot Rolled Steel Plate Mill standard. High Strength ...

AISI 1008 Carbon Steel (UNS G10080) - AZoM

Topics Covered

ASTM A36 Carbon Steel vs. Hot Rolled SAE-AISI 1008 ...

Both ASTM A36 carbon steel and hot rolled SAE-AISI 1008 are iron alloys. Their average alloy composition is basically identical. There are 31 material properties with values for both materials. Properties with values for just one material (1, in this case) are not shown.

Hot Rolled 1008 Carbon Steel :: MakeItFrom

Hot rolled SAE-AISI 1008 is SAE-AISI 1008 steel in the hot worked condition. The graph bars on the material properties cards below compare hot rolled SAE-AISI 1008 to: wrought carbon or non-alloy steels (top), all iron alloys (middle), and the entire database (bottom).[PDF]

Datasheet for Steel Grades Carbon Steel AISI 1008

AISI 1008 Heat Treatment Regime Annealing Quenching Tempering Normalizing Q & T √ √ √ √ √ AISI 1008 Range of products Product type Products Dimension Processes Deliver Status Plates / Sheets Plates / Sheets 0.08-200mm(T)*W*L Forging, hot rolling and cold rolling Annealed, Solution and Aging, Q+T, ACID-WASHED, Shot Blasting Steel Bar ...

Plate 1008 - Benjamin Steel

Thickness in Inches Widths Lengths Lbs/Sft 3/16: 48, 60: 120, 144: 7.660: 1/4: 48, 60: 120: 10.210: 5/16: 48: 120: 12.760: 3/8: 60: 96, 120: 15.320

Hot Rolled Steel Bars - russelmetals

HOT ROLLED STEEL BARS ... CUT & STRAIGHTENED ROD – A soft grade of steel, about 1008 to 1010 carbon, produced from coils of wire. By passing through the straightening rolls a bright finish is obtained similar to cold finished bars. ... AISI 1045 – Medium carbon machinery steel offering higher strength than low carbon in the as rolled ...

1008 vs 1010 Steel Comparison | Capital Steel & Wire

Differences between 1018 and 1020 grade steel including chemical composition and mechanical properties of cold drawn and hot rolled 1018 and 1020 steel. The following is a comparison of the chemical composition and mechanical properties of 1008 steel and 1010 steel.

Cold Rolled Carbon – Olympic Steel

olysteel› ProductsHome / Products / Cold Rolled Carbon Cold Rolled Steel Products We commonly stock commercial quality (CQ), AHSS Advanced high strength steel, drawing steel (DQ), COR-TEN® weathering steel, 1/4 Hard and 1/2 Hard, automotive grades, and more cold rolled steel coil and sheet products.

High Tensile Hot Rolled Aisi 1025 Steel Plate

aisi 1025 hot rolled steel plate - Henan BBN. Buy High Tensile Hot Rolled Aisi 1025 Steel Plate steel is a building material composed of chemical components such as silicon, sulfur and phosphorus. Buy High Tensile Hot Rolled Aisi 1025 Steel Plate can be used F, b, z were expressed as boiling steel, semi-static steel, killed steel. Learn more

Available Grades of Steel - midwestmaterials

Carbon Flat Rolled. Available Grades of Hot Rolled Steel and Hot Rolled Pickled and Oiled Steel. AISI 1006 AISI 1008 AISI 1010 AISI 1012 AISI 1015 AISI 1018 AISI 1020 AISI 1021 AISI 1022 AISI 1025 AISI 1026 AISI 1030 AISI 1035 AISI 1040 AISI 1045[PDF]

Steel Plate & Sheet - Alro Steel | American Metal Supplier

Steel Plate and Sheet ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings. Typical Analysis* ASTM A-36 Carbon (C) max % 0.25 0.25 0.26 0.27 0.29

AISI 1008 Steel, hot rolled bar, 19-32 mm (0.75-1.25 in) round

AISI 1008 Steel, hot rolled bar, 19-32 mm (0.75-1.25 in) round Categories: Metal; Ferrous Metal; Carbon Steel; AISI 1000 Series Steel; Low Carbon Steel. Material Notes: Usually produced as rimmed, capped, semikilled, and fully killed, Rimmed have exceptional cold formability.

AISI 1010 Carbon Steel (UNS G10100) - AZoM

Machinability (based on AISI 1212 steel as 100 machinability. The machinability of group I bar, rod, and wire products can be improved by cold drawing) 55 55 AISI 1010 carbon steel is mostly used in the annealed or case hardened condition. However, it can also be heat treated, quenched and tempered ...

China High Strength AISI 1008 Carbon Steel Plate for ...

Chengdu Derbo Steel Co., Ltd. AISI 1008 Steel Plate, AISI 1008 Carbon Steel Plate, Carbon Steel Plate manufacturer / supplier in China, offering High Strength AISI 1008 Carbon Steel Plate for Construction, ISO2531 Dn300 K9 Flange End Ductile Iron Pipe, ASTM A240 Gr. 316L Rtj Ring Joint Gasket and so on.

Online Metal Store | Small Quantity Metal Orders | Metal ...

A366/1008 Steel This alloy is generally used for "commercial quality" cold rolled steel sheet. It is known for its very good formability and comparatively high strength. It has a very good surface finish that is far superior to hot rolled A36.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.