Tel: +86-371-86151827

sus202 secondary hot rolled steel coil pickled

Steel grade:sus202 secondary hot rolled steel coil pickled

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sus202 secondary hot rolled steel coil pickled Introduction

Hot Rolled Steel Sheet, Pickled and Oiled Steel Products ...

Hot Rolled Pickled and Oiled – hot rolled coil or sheet steel that has been descaled of oxide film by either a chemical method, mechanical method, or a combination of both and oiled to help retard corrosion during storage and after descaling. "HRPO" is available in various gauges, widths, and cut lengths or coil.Galvanized Steel Sheets · Stainless Steel · Aluminum · Hot Rolled, Pickled & Oiled

What Is Hot Rolled Pickled and Oiled (HRPO) Steel ...

Thus, hot rolled pickled and oiled (from here on referred to as HRPO) flat rolled steel coils were born. HRPO steel is still considered hot rolled steel even though it does not have any scale. The final product of HRPO steel is created when steel mills use acid baths to remove the scale that usually forms on the surface of carbon steel coil, as ...

Steel Coils - Commerce Steel Corp. - Hot Roll, Pickled ...

Commerce Steel Corp, headquartered in metro Detroit, provides a full line of sheet and coil steel ranging in thickness from 30 gauge through 3/8”. We have a large inventory of steel coils in standard grades C1006 through C1074 including IF material as well as high strength grades from Grade 40 to Grade 80 in HSLA and Structural Steel.

Hot Rolled Coil Secondary - Hot Rolled Coil Secondary ...

Hot Rolled Coil Secondary directory ☆ Hot Rolled Coil Secondary manufacturers, suppliers ☆ Hot Rolled Coil Secondary buyers, importers, wholesalers, distributors. Menu ... Secondary Hot Rolled Steel Sheet (Pickled and Oil) Commodity:Hot Rolled Steel Sheet (PO) Technique: ...

Hot Rolled Steel Sheet & Coil | Alliance Steel

alliancesteel.net› ProductsAlliance Steel’s hot rolled steel sheet & coil service capabilities include slitting, shearing, blanking, stretcher leveling, degreasing and brushing and metallurgical support. Protect hot rolled steel products from corrosion with pickled and oiled and pickled dry surface treatments. Contact us today.[PDF]

Hot-Rolled Steel Sheets and Coils

Hot-Rolled Steel Sheets and Coils meeting a variety of standards ranging ... secondary refining process, and continuous casting to remove excess carbons and impurities for ... Pickling The hot-rolled coil passes through the pickling line, where surface scales (iron oxide layer) are removed ...

secondary hot rolled steel - Wholesale secondary hot ...

Wholesale secondary hot rolled steel - buy latest secondary hot rolled steel direct from 8187 secondary hot rolled steel Factories.

Hot Pickled Dry Sheet & Coil | Alliance Steel

alliancesteel.net› Products› Hot Rolled SteelProtect against corrosion without oil using hot rolled pickled dry steel products from Alliance Steel. Hot rolled pickled dry steel is descaled of oxides and rinsed, but the material’s surface is not oiled after pickling. Contact Alliance Steel for pickled dry product information and availability.

Hot Rolled Coil Steel Pickled, Hot Rolled Coil Steel ...

Alibaba offers 10,239 hot rolled coil steel pickled products. About 41% of these are stainless steel sheets, 10% are steel sheets. A wide variety of hot rolled coil steel pickled options are available to you, such as aisi, astm, and din.

Steel Coils for Sale | Hascall Steel Company

Hascall Steel Company offers high-strength flat rolled steel coils for sale, ideal for a range of industrial and manufacturing applications. What is a Flat Rolled Steel Coil? A flat rolled steel coil is a type of metal sheet wound into rolls, the width of which is larger than the thickness.

Stainless Coil « Rolled Steel Products

Stainless Coil. Rolled Steel Products is a processor and stock metal service center for all grades and thicknesses of stainless coils.Our stainless steel coil can be rolled to a desired shape…round, modified, etc. This process is performed by removing the slitting burr from the edge of the slit stainless steel to make the edge safe for exposed applications.

Hot Rolled Coil/Sheet | North American Stainless

Hot Rolled Coil/Sheet. NAS’s hot rolled coil product is available in annealed and pickled condition. The continuous mill plate product (CMP) is available in coil form or sheet form, in wide or narrow width.

Pickled Steel Coil, Pickled Steel Coil Suppliers and ...

A wide variety of pickled steel coil options are available to you, such as aisi, en, and astm. You can also choose from coil, plate. As well as from iso, ibr, and sgs. And whether pickled steel coil is cold rolled, or hot rolled. There are 12,351 pickled steel coil suppliers, mainly located in Asia.

Lane Steel - Inventory

Lane Steel has a large inventory of prime and non-prime, coated and uncoated flat rolled steel products. We guarantee professional service and punctual delivery. We specialize in Hot Dipped Galvanized, Galvalume, Galvanneal, Cold Rolled and Hot Rolled products.

Secondary Steel Chicago | Steel Broker Chicago | Buy Steel ...

We've been in the secondary steel industry for a combined 250 years, making us a leading steel broker in Chicago. (616) 538-4305 ... We can take any steel coil we have in our warehouses, and transform it into whatever fits your needs! ... Hot Rolled & Pickled, Hot Dipped Galvanized, Galvanealed, Galvalume, Electro Galvanized, and Aluminized.

Hot Rolled Stainless Steel Sheet - zlysspecialsteel

Hot Rolled Stainless Steel Sheet Synopsis of Hot Rolled Stainless Steel: After the straight hair is cut through the cutting head, cutting tail, cutting edge and multi pass straightening and leveling finishing line, then cut the plate or heavy roll, that is, hot rolled stainless steel plate, flat hot rolled steel coil, longitudinal cutting belt and other products.

hot rolled coil steel pickled - alibaba

Alibaba offers 10,244 hot rolled coil steel pickled products. About 10% of these are steel sheets, 1% are steel pipes, and 1% are steel round bars. A wide variety of hot rolled coil steel pickled options are available to you, such as aisi, astm, and din.

Carbon Flat Rolled Exporters - Excess Prime and Secondary ...

Carbon Flat Rolled. Hot Rolled Coils – Excess Prime & Secondary. A Hot Rolled Sheet is the most basic type of flat-rolled steel. It can be utilized in its original form or serve as base metal for Cold Rolled and Coated Steel products.

Manufacturer - Quality Hot Rolled Stainless Steel Coil|

After the straight hair is cut through the cutting head, cutting tail, cutting edge and multi pass straightening and leveling finishing line, then cut the plate or heavy roll, that is, hot rolled stainless steel plate, flat hot rolled steel coil, longitudinal cutting belt and other products.

Hot Rolled Coil Pickling - Hot Rolled Coil Pickling ...

Pickled Steel Coil- rolled coil 1,Cut the cost to use hot-rolled pickled coil instead of cold rolled coil. 2,With better quality than the hot rolled coil.The surface is easy to be welded,oiled,painted as the oxide scales was removed. The size is...

Hot Rolled Plate - unisteelbd

On cooling the steel coil can be sold as is or cut to length (plate) or further processed through the cold rolling mills. We offer you , Hot Rolled Steel - Hot Rolled Pickled & Oiled, Hot Rolled Pickled Dry Steel Plate verity grade and size Prime and Secondary. Assorted & Un assorted are available Commercial Soft Quality. THICKNESS WIDTH LENGTH

Compare EPS Pickled Steel to HRPO and Hot Roll Black

Compare EPS To Competing Flat Rolled Steels EPS-processed hot roll black strip replaces acid-pickled strip steel – both dry and oiled – hot roll black, dry shot blasted strip and SCS. The visual difference between EPS and these steels is very apparent – EPS-processed steel is dry, remarkably clean and very uniform across its surface.[PDF]

U003en Cold-Rolled Steel Sheets and Coils

Cold-Rolled Steel Sheets and Coils are extensively used as basic materials in automobiles, electrical appliances, steel office equipment, various types of ... The stock sheets or Hot-Rolled Steel Sheets and Coils go through a continuous pickling process, to remove surface scale (iron oxide layer) to make the surface beautiful and flawless in ...

Hot rolled coil, strip and plate | Outokumpu

Offering exceptional versatility, Outokumpu hot rolled coil, strip and plate are used in virtually all industries and markets. In addition to plates, Outokumpu produces quarto plate that is available in thicknesses up to 130 mm. . Hot rolled coils, strips and plates are available in a wide range of heat- and corrosion-resistant grades in all stainless steel types: austenitic, ferritic, duplex ...[PDF]

The Pickling Process - California Steel Industries

The Pickling Process CSI’s pickling line started up in late 1994, and typically processes two out of every three coils produced at the Hot Mill. Its primary function is to remove the thin layer of oxidized iron, or scale, that forms on the surface of the steel at the temperatures employed during hot rolling.

Hot rolled coil - Pickled & Oiled

Hot rolled coil - Pickled & Oiled Pickled & Oiled coil is hot rolled material that has been descaled of oxide film by both mechanical and chemical methods and then oiled to help retard corrosion during storage and after descaling. ... A4.1 - Hot rolled coil - Drawing & Forming steel grades

Carbon Steel || Sheet Steel || Rolledsteel « Rolled ...

As a registered ISO 9001:2008 company, Rolled Steel Products state of the art equipment meets virtually any requirement in panel flat quality leveling, precision slitting, close tolerance sheet blanking, strip quality edge conditioning, precision shearing and complete cold reducing capabilities.

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.