Tel: +86-371-86151827

sabs equivalent of a 36 plate chemical composition

Steel grade:sabs equivalent of a 36 plate chemical composition

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

sabs equivalent of a 36 plate chemical composition Introduction

BEBON steel - A36 steel plate

A36 steel plate is one mainly of Carbon and low alloy steel, ASTM A36 steel is a widely accepted general purpose structural quality steel offering a constant 36 ksi min. yield point for all thicknesses of material. It is widely used in the construction of buildings, bridges …

ASTM A36 Steel Plate - Completely Specifications You ...

What Is ASTM A36[PDF]

ASTM A36 Mild/Low Carbon Steel

CARBON STRUCTURAL STEEL PLATE all measurements in inches THICKNESS WIDTH LENGTH A36 3/16" – 8" 48" – 120" 96" – 480" Machining The machinability rate of ASTM A36 is estimated to be 72%, and the average surface cutting feed of ASTM A36 is 120 ft/min. Machining of ASTM A36 steel is not as easy as that of AISI 1018 steel. Welding

ASTM A36 Steel Composition, Properties, Hardness ...

A36 material is often compared to SAE / AISI 1018 because of their similar chemical composition, A36 steel is commonly hot rolled, while 1018 steel is commonly cold rolled, besides, the machenical properties and quality of SAE 1018 is better than ASTM A36.

ASTM A36 Steel Plate - A36 Carbon Steel Plate | Leeco ...

leecosteel› Steel Plate ProductsASTM A36 steel plate is one of the most widely used carbon structural steels used in the industry. It can be riveted, bolted or welded in the construction of bridges and buildings, and for general structural purposes. ASTM A36 is known to be an equivalent to EN S275 steel plate.

A-36 Properties - Benjamin Steel

Chemical Composition; A-36 Properties; Material Safety Data Sheets; Glossary; Terms and Conditions; Email Address. Powered by ChronoForms - ChronoEngine. [email protected] A-36 Properties Plate* Up thru 3/4: Over 3/4 thru 1-1/2: Over 1-1/2 thru 2-1/2 ... ** Yield Point 32,000 psi for plates over 8 in. Corporate Office: 777 Benjamin ...

Invar 36 / Nilo Alloy 36/ Alloy 36 (UNS K93600 / K93601 ...

Alloy 36 (NILO 36, INVAR 36) is a Nickel-Iron, low expansion alloy which contains 36% Nickel. Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C). Invar 36 also retains good strength and toughness at cryogenic temperatures.

A36 SA36 Common carbon steel plate--YUSHENG STEEL

YUSHENG STEEL specialized in wide heavy steel plates,as for carbon structure steel plate ASTM A36,now we can roll the maximum thickness till 560 mm and gurantee the steel properity.The heaviest unit weight can reach to 46 Metric Tons using the 62 tons steel ingots.This is the unique technical in China steel mills. Chemical composition of Heat ...

SABS 936 Grade SG42 - Iron - Matmatch

See the chemical composition and physical properties of SABS 936 Grade SG42, find alternative materials, and connect with suppliers.

ASTM A36 Steel Plate - Completely Specifications You ...

Hot rolled steel plate, coil and strip, ASTM A570/M, Grade 36. Material Properties/Specifications. We shall explain material specifications from chemicals and mechanical properties. Although, contact us for ASTM A36 standard specification in PDF, we shall send you immediately. Chemical composition of A36 steel plate

A36 SA36 Common carbon steel plate--YUSHENG STEEL

YUSHENG STEEL specialized in wide heavy steel plates,as for carbon structure steel plate ASTM A36,now we can roll the maximum thickness till 560 mm and gurantee the steel properity.The heaviest unit weight can reach to 46 Metric Tons using the 62 tons steel ingots.This is the unique technical in China steel mills. Chemical composition of Heat ...

SABS / SANS 1431 STEEL MATERIAL SPECIFICATIONS - Flange

sabs / sans 1431 steel material specifications FOR BACKING RING & WELDING ON FLANGES TABLE 1 - Chemical composition % (ladle analysis) as specified in SABS 1431, 1987

A36 vs. 1018 Steel Comparison | Capital Steel & Wire

So again, in this comparison, we’ll assume A36 is hot rolled. It comes in many different bar shapes including squares, rounds, rectangles, and is also often manufactured into channels, angles, I-Beams and H-Beams. It is also commonly manufactured as a steel plate product. Chemical Properties. Chemically, A36 and 1018 are very similar.

Chemical Composition - Tubes, Fittings - Ranges, Plates

ASME SA516 Grade 60/70 Plates, API 5L X52 Seamless Pipes, API 5L X60 Seamless Pipes, API 5L X65 Seamless Pipes, API 5L X70 Seamless Pipes, S355J2G3 EN10025 Plates, ST52-3 DIN17100 Plates, SA515 Grade 60/70 Plates, SA182 F11 Bars, SA182 F22 Bars, SA182 F91 Bars, SA182 F5 Bars, SA240 Grade 321H Plates, SA240 Grade 347H Plates, SA240 Grade 316L Plate, API5L X52 …

ASME SA-36|Grade SA36|SA 36 CS steel plate material--Xin ...

Chemical composition for SA36 carbon steel (Heat Analysis Max%) Main chemical elements composition of A36. Thickness(mm) ... 0.85-1.20. 100Grade Guide: A36 Steel | Metal Supermarkets - Steel ...

While there are some chemical composition requirements that A36 steel must adhere to, the most important characteristic is the yield strength requirement. Other Mechanical Properties. A36 steel can have ultimate tensile strengths from 58,000 to 79,800 psi.

DH36 Shipbuilding steel plate - BEBON INTERNATIONAL

DH36 shipbuilding steel plate is used for shipbuiling&platform.The shipbuilding steel plate grade DH36 is the high tensile strength steel.DH36 shipbuilding steel is the Hull structural steel,with it's good toughness properties, higher strength,strong corrosion-resistance,the processing properties,and welding properties.ASTM A131 DH36 steel plate can ...

Q345 Steel Specification and Equivalent Standard

Q345 steel specification: Q345 steel belongs to 16Mn steel grade, usually it is produced in hot rolled state, hot rolled steel plate, hot rolled steel coil/sheet, it has comprehensive mechanical and welding property, as it shows good performance in structural purposes, it is widely used as welding structural part in manufacturing of ship, railway and vehicles, bridges, boiler, pressure vessel ...

St37-2 steel plate - BEBON INTERNATIONAL

St37-2 steel plate, under DIN17100 standard St37-2 steel plate, under DIN17100 standard, we can regard St37-2 steel plate as Common Carbon structural steel . St37-2 steel plate is one mainly of Carbon structural steel, St37-2 is a type of steel sheet under DIN standard which is used to build ship, bridge, belongs to high strength sheet.

ASTM A36 - steel-grades

This page cover the Mechanical Properties, Chemical Element, Cross Reference of ASTM A36 steel grade.[PDF]

Steel Plate & Sheet - Alro Steel

ASTM A-36 Hot Rolled Plate A-36 is a structural quality carbon steel used in a variety of general construction applications including; bolted, riveted, or welded construction of bridges and buildings.

304/304L|316/316L - ASTM A240 Stainless Steel Plate ...

ASTM A240 steel plate covers Austenitic Steels, Ferritic steels and Martensitic Steels. 304/340L, 316/316L is common stainless steel grades for many industries, ANSON can provide you best ASTM A240 steel plate for your project.

A36 steel - Wikipedia

A36 steel has a Poisson's ratio of 0.26, and a shear modulus of 75 GPa (10,900,000 psi). A36 steel in plates, bars, and shapes with a thickness of less than 8 in (203 mm) has a minimum yield strength of 36,000 psi (250 MPa) and ultimate tensile strength of 58,000–80,000 psi (400–550 MPa).Properties·

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.