Tel: +86-371-86151827

buy hard wear resistance steel plate

Steel grade:buy hard wear resistance steel plate

Thickness: 2mm-500mm

Certification: ABS, GL, BV, GOST, TS, CCS, CNNC, ISO

Payment Terms: T/T OR LC at sight

steel plate is widely used, involving various mechanical and engineering fields.

Tel: +86-371-86151827

E-mail: [sales1@bebonchina.com]

buy hard wear resistance steel plate Introduction

Hardox® wear plate- Wear and abrasion resistant steel - SSAB

With Hardox® wear plate, you can design structures that are wear-resistant, strong and lightweight, all at the same time. Today, Hardox® has come a long way from its early years. It comes in a much wider range, and the traditional Hardox® wear plate is also available as wear-resistant tubes and round bars. A die-hard steel for long-living ...Hardox 500 Tuf · Contact Us · Hardox Extreme · Product Overview

Abrasion Resistant Steel Plate | Leeco Steel, LLC

leecosteel› Steel Plate ProductsThe benefits of employing wear-resistant plate steel in applications involving impact and/or sliding contact with abrasive material are immense. Learn more about abrasion resistant steel plate. Steel plate for use in abrasive conditions is not typical because it is not governed by any ASTM code or spec.

Hardox® 450 - Central Steel Service Inc.

Hardox® 450 is intended for applications where demands are imposed on abrasion resistance with good cold bending applications. Hardox® 450 is supplied in a primed and blasted condition, therefore having a superior surface condition when compared to other abrasion resistant plate products in the marketplace.

Abrasion-Resistant Steel Plate and Hardox Wear Plate ...

Abrasion-resistant steel plate and Hardox wear plate equivalent materials in stock in a range of thicknesses at Murray Steel Products. Full profiling, cutting and drilling service available.

MetalsDepot® - AR400 Plate | Abrasive Resistant Plate ...

AR400 F Steel Plate is formable grade of Abrasive Resistance Steel Plate designed to accomodate applications where a life of wear is the primary cause for failure among other grades of steel plate.AR400 abrasive resistance steel plate is intended for higher, impact, wear applications where cold-bending and very good weldability is important.

Wear & Impact Resistant Steel for Heavy Equip | Clifton Steel

Clifton Steel brings over 40 years of experience in supplying impact resistant steel and wear resistant steel plate to the Aggregate industry. The company devotes tireless effort to meeting and exceeding the mining industry’s highest quality standards in all of its steel wear plate product offerings.

MetalsDepot® - AR400 Plate | Abrasive Resistant Plate ...

AR400 F Steel Plate is formable grade of Abrasive Resistance Steel Plate designed to accomodate applications where a life of wear is the primary cause for failure among other grades of steel plate.AR400 abrasive resistance steel plate is intended for higher, impact, wear applications where cold-bending and very good weldability is important.

Wear & Impact Resistant Steel for Heavy Equip | Clifton Steel

Clifton Steel brings over 40 years of experience in supplying impact resistant steel and wear resistant steel plate to the Aggregate industry. The company devotes tireless effort to meeting and exceeding the mining industry’s highest quality standards in all of its steel wear plate product offerings.

AR400 & AR500 Wear Plate & Bar | Specialty Steel Co.

AR400 is “thru-hardened”, abrasion resistant, alloy wear plate. Hardness range is 360/440 BHN with a nominal hardness of 400 BHN. Service Temperature is 400°F. This plate product is intended for use in applications where a good balance of formability, weldability, toughness and abrasion resistance …

Wear Resistant Steel - Wear Resistant Steel XAR 500 ...

We bring froth an impregnable range of Wear Resistant Plate. This superior make wear resistant steel is highly demanded in the international markets for their optimum quality, durability and matchless reliability. These finest grade quality wear resistant steel can be customized in accordance with the client's requirements.

Wear Resistant Plates - Sail Hard Plate Manufacturer from ...

Manufacturer of Wear Resistant Plates - Sail Hard Plate, Steel Wear Plates, Wear Plates and Wear Resistant Steel Plates offered by Seven Star Speciality Steel, Mumbai, Maharashtra.

Wear Plates | Precision Grinding

Abrasion Resistant wear plates (AR Plate) or steel liners are used in many applications where friction between two parts or materials creates degradation. Wear plates are expendable items that are used to prevent excessive wear or damage to expensive equipment.

Wear resistant steels | Industeel

Wear resistant steels. For Industeel, abrasion resistant steels are much more than just the classical “wear plate”: Relia® is a range of high hardness, low-alloyed martensitic steels, which obtain their hardness through intense water quenching during manufacturing.; Creusabro® is our exclusive and patented range of advanced wear and impact abrasion resistant steels.

The world's widest range of wear-resistant steels - SSAB

With Hardox® wear plate, you can design structures that are wear-resistant, strong and lightweight, all at the same time. Today, Hardox® has come a long way from its early years. It comes in a much wider range, and the traditional Hardox® wear plate is also available as wear-resistant tubes and round bars. A die-hard steel for long-living ...

Hardox 400 - Easy to form, wear-resistant steel from SSAB ...

The all-around steel that resists wear and abrasion. Hardox® 400 is an abrasion-resistant steel with a nominal hardness of 400 HBW. Hardox® 400 is an all-around wear resistant steel. Thanks to its high toughness, good bendability and weldability, this steel can be used in structures with moderate wear.

WearPro - Steel Plate Fabrication for Mining Industry

CREUSABRO® 8000(P) is a high performance wear resistant steel, exhibiting a wear resistance 50% higher than that of conventional 500 HB water quenched steel. CREUSABRO® 8000(P) uses an innovative concept, based on a unique combination of chemical …

Wear Plate Manufacturer & Supplier - HART Industry

HART Industry is China manufacturer & supplier who mainly produces chromium carbide overlay plate, wear plate, welding wires since 2003. Hope to build business relationship with you.

Abrasion Resisting Plate - Tell Steel Inc.

AR-400 Plate is a quenched and tempered high strength alloy steel which has superior abrasion resistance and toughness.AR-400 alloy steel will reduce material handling costs to a minimum for earth moving, mining and other similar industries in which a combination of toughness and abrasion resistance is required. Typical uses are wear plates, truck bodies, chute liners and storage bin liners.

Wear Resistance Of Steel, Wear Resistance Of Steel ...

There are 101,133 wear resistance of steel suppliers, mainly located in Asia. The top supplying countries are China (Mainland), Japan, and India, which supply 99%, 1%, and 1% of wear resistance of steel respectively. Wear resistance of steel products are most popular in Southeast Asia, Domestic Market, and North America.

ASTM A514 AR400 Abrasion Resistant Steel Plate | Buy ...

ASTM A514 AR400 Abrasion Resistant Steel Plate – Order Large or Small Quantity Online – Cut to Size AR400 Plate – No Minimum Order

Steel grade

Steel specification

Our advantage

Steel Plate

1).2500mm production line-(Width:1600-2300mm, Thickness:6-30mm,Annual capacity:1,600,000 Tons;

The mainly steel plate we specialized in producing are shipbuilding steel, weathering resistant steel, boiler and pressure vessel steel, pipeline steel and so on. In addition, we can also arrange production according to the following standards - EN10025, EN10028, DIN 17100, ASTM A131, JISG3101, JISG3106...

2).3500mm production line-(Width:2000-3050mm, Thickness:10-80mm, Annual capacity: 2,000,000 Tons;

3).4300mm production line-(Width:1500-4100mm, Thickness:6-300mm, Annual capacity: 1,800,000 Tons;

Steel Pipe

The Seamless pipe production line range is OD 10.3mm--965.2mm, wall thickness 1.0mm--120mm, Annual capacity is 500 thousand tons.

We can do shot blasting and anti-corrosion according to DIN 30670 for diameter 10mm-3500mm,which is the most advanced level in China. To guarantee the quality, we can do Hydraulic test, Ultrasonic Testing, X-Ray test and drop hammer test before each shipment.

LSAW pipe production line range is OD 406mm--2500mm, wall thickness 6mm--50mm, Annual capacity is 150 thousand tons.

ERW pipe production line range is OD 17.1mm--660mm, wall thickness 0.6mm--22mm, Annual capacity is 100 thousand tons.

SSAW pipe production line range is OD 219.1mm--3500mm, wall thickness 3.2mm--25.4mm, Annual capacity is 200 thousand tons.

Stainless Steel

Cold rolled stainless steel plate/coil- (Thickness: 0.3-3.0mm; Width: 1000-2000mm; Length: According to customer's requirement; Surface:2B, 2D, BA, No.3, No.4)

Bebon has long term cooperation with TISCO, LISCO, ZPSS and Bao steel, etc..which are the top biggest and most famous stainless steel factories. Due to the good relationship with them, we have become their first-class agent. We can provide the best quality goods with competitive price.

Steel Plate & Coil Specification

Hot rolled stainless steel coil sheet
Cold rolled stainless steel coil & sheet
Thickness
3.0-12.0mm
Thickness
0.3-3.0 mm
Width
1219mm
Width
1000,1219,1500
Length
coil or as per requirement.
Length
coil or as per requirement.
Surface
No.1 or 1D
Surface
2B
Original
TISCO
Original
TISCO
Standard
GB/T4237-2015 ASTM A240/A240M JIS G4304
Standard
GB/T3280-2007 ASTM A240/A240M JIS G4305 EN10088-2:2005
MOQ for coil
13mt or as per coil actual weight
MOQ for coil
5mt or as per coil actual weight
MOQ for sheet
5 Pcs
MOQ for sheet
5 Pcs

According to the composition is divided into carbon steel and alloy steel, can be further classified according to uses, high strength low alloy steel plate, boilers and pressure vessels steel plate, mold plate, and shipbuilding and offshore platform steel plate, pipeline steel plate, wear-resistant steel plate, military uses steel plate and so on,

Boiler Or Pressure Vessel Steel Plate

It includes carbon steel, carbon manganese steel, micro-alloy steel, low alloy and high strength steel and low temperature steel. The working temperature is generally from -20C to 500C, and the individual can reach 560 degrees centigrade. The Pressure vessel steel plate is a special material related to the national economy and the people's livelihood. It is a short line product of the metallurgical industry.
Pressure Vessel Steel plate have many types, we can provide SA387, SA516, SA537, SA517 and so on, American Standard boiler or pressure vessel steel plate, already export to the United States, Australia, the Middle East, Southeast Asia and many other countries, high quality and low price, can be cut according to customer requirements..

Steel Standard:
ASTM A203 / ASME SA203, ASTM A204 / ASME SA204, ASTM A285 / ASME SA285
ASTM A299 / ASME SA299, ASTM A302 / ASME SA302, ASTM A387 / ASME SA387
ASTM A515 / ASME SA515, ASTM A516 / ASME SA516, ASTM A517 / ASME SA517
ASTM A533 / ASME SA533, ASTM A537 / ASME SA537, ASTM A612 / ASME SA612
ASTM A662 / ASME SA662
EN10028-2, EN10028-3, EN10028-5
DIN 17155

Carbon And Low-Alloy High-Strength Steel Plate

Carbon Steel, main point is that the mass fraction of carbon is less than 2.11% and does not contain the alloy elements and are specially added. Low-alloy high-strength steel is a kind of engineering structural steel developed by adding a small amount of Mn, Si and trace elements such as Nb, V, Ti and Al in the basis of Carbon structural steel.
The so-called low alloy is that the total alloy elements in the steel do not exceed 3%, which are mainly used for manufacturing various engineering structures with high strength, such as bridges, ships, vehicles, high pressure vessels, oil and gas transmission pipelines, large steel structures and so on.
Carbon steel plate and low alloy high strength steel plate, is the most common and widely used steel plate, strong supply capacity, the domestic production of the largest steel plate, we can cut processing according to customer requirements, and also can be processed according to the requirements of the drawings by grinder, our finished products are praised by our many customers, welcome to send us the enquiries and the drawing.

Steel Standard:
ASTM A36, ASTM A283, ASTM A514 / ASME SA514
ASTM A572 / ASME SA572, ASTM A633 / ASME SA633, ASTM A709
EN10025-2, EN10025-3, EN10025-4, EN10025-6 
DIN17100, DIN17102
GB/T700, GB/T1591, GB/T16270

Shipbuilding Or Offshore Structural Steel Plate

Marine steel plate refers to the hot rolled steel plate used to manufacture the hull structure according to the standard requirements of the Classification Society. Shipbuilding or Offshore structural steel plate, first, good toughness is the most critical requirement. In addition, it requires high strength, good corrosion resistance, welding performance, processing performance and surface quality. In order to ensure quality and ensure enough toughness, the chemical composition of Mn/C is above 2.5, and the carbon equivalent is also strictly required, and it is produced by a steel factory approved by the Ship Inspection Department. With the development of marine industry, the steel demand is rising dramatically, in addition to the ordinary ship plate, offshore platform steel plate in recent years is the demanded for a wide range. Our Steel's EN10225 standard steel plate, get the praise of our many customers, including S355G7, S355G8.

Ship Class Steel Plate

Standard: CCS, ABS, LR, GL, BV, DNV, KR, RINA, ETC

Grade :A, B, D, E, AH36, DH36, EH36, AH40, DH40, EH40, FH36, FH40

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


EN10225 Weldable Structural Steels for Fixed Offshore Structures.

Standard: EN10225
Grade :S355G2+N, S355G3+N, S355G5+M, S355G6+M, S355G7+N, S355G8+N, S355G7+M, S355G8+M, S355G9+N, S355G9+M, S355G10+N, S355G10+M
S460G1+QT, S460G1+M, S420G2+QT, S420G2+M,S460G3, S460G4,and so on.

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


API Spec 2H specification for Carbon Manganese Steel Plate for Offshore Structures, API Spec 2H specification covers two grades of intermediate strength steel plates up to 4 in. thick for use in welded construction of offshore structures

Standard: API SPEC 2H
Grade :API Spec 2H Grade 42, Grade 50

Thickness : 8mm-500mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm

Wear Resistant Steel Plate

Wear resistant steel plate has high wear resistance and good impact resistance, capable of cutting, bending, welding, welding, can take the plug welding and bolt connecting with other structures are connected, the advantages of time saving, convenient in maintenance process, widely used in metallurgy, coal, cement, electricity, glass, mining, building materials, tiles and other industries, compared with other materials, has a very high price, has been more and more favored by the industry and manufacturers.

Standard: WEAR RESISTANCE STEEL PALTE
Grade :NM360, NM400, NM500, NM550

WNM360, WNM400, WNM450, WNM500

Thickness : 8mm-150mm 
Width : 1000mm-4000mm 
Length : 1000mm-20000mm


If you are interested in our company or products, welcome to visit our company or local offices; you can also get contact with us through online consulting, demand table submission, e-mails and telephones. Our staff shall wholeheartedly provide product information, application knowledge and good service for you.

Inquiry

Please send your processing requirement/ the drawings to sales1@bebonchina.com or leave a message below. Our professional after-sales personnel will response you in 24 hours.